Bar magnet determining north pole

AI Thread Summary
To determine the north pole of a bar magnet without using another magnet, one suggested method involves using a solenoid to induce current and create an electromagnet. By suspending the magnet horizontally and bringing it near the solenoid, the interaction can reveal the magnet's polarity based on attraction or repulsion. Another idea discussed was floating the magnet in water to minimize friction, allowing it to align with the Earth's magnetic field. The conversation also touched on the effects of using a horseshoe magnet and the principles of magnetic induction. Ultimately, the direction of current flow from a battery can help in identifying the magnet's north pole through the Cork Screw Rule.
Flyx
Messages
28
Reaction score
7
I came across this problem:

Explain how you would determine which was the north pole of a bar magnet, without using any other magnet.

I was thinking of using a solenoid, and dropping the magnet in. Then you can determine whether it was a north or south pole by whether the current flows clockwise or anticlockwise. I was thinking that one of these would produce a negative current, but I am not sure which. Is there any way to do this?
 
  • Like
Likes ProfuselyQuarky
Physics news on Phys.org
Wouldn't it just be a matter of hanging the magnet from a string?
 
OrangeDog said:
Wouldn't it just be a matter of hanging the magnet from a string?

That won't work if the magnet isn't strong enough.
 
Well if there are no restrictions on the magnet strength then it is a solution!
 
Just float it in water...

https://www.kjmagnetics.com/images/blog/water-compass400.jpg
water-compass400.jpg
 
  • Like
Likes davenn, Nidum and Flyx
Does the Earth count as another magnet?
 
berkeman said:
Just float it in water

What if it is a horse-shoe magnet?

CWatters said:
Does the Earth count as another magnet?

No
 
Flyx said:
What if it is a horse-shoe magnet?
No

In the end all you are trying to do is create a moment to rotate the magnet, so again, if you have both poles facing the ground there will still be a torque trying to rotate the magnet...from a string!
 
  • Like
Likes Flyx
Flyx said:
What if it is a horse-shoe magnet?
You will still get a small torque that will align the magnet. There is an easy trick to make the torque for a horseshoe magnet much larger in the Earth's magnetic field. Can you think what that trick might be? :smile:
 
  • Like
Likes ProfuselyQuarky
  • #10
berkeman said:
You will still get a small torque that will align the magnet. There is an easy trick to make the torque for a horseshoe magnet much larger in the Earth's magnetic field. Can you think what that trick might be? :smile:

Vacuum?

What if you were on a planet with no magnetic field?
 
  • #11
Flyx said:
Vacuum?
Water is pretty frictionless for slow movements. No, I had a different improvement in mind... :smile:
Flyx said:
What if you were on a planet with no magnetic field?
Then you would need to wave one pole of the magnet past a coil of wire and measure the polarity of the voltage induced in the coil. Have you read about magnetic induction yet in your studies? :smile:
 
  • Like
Likes cnh1995
  • #12
Flyx said:
I was thinking of using a solenoid, and dropping the magnet in.
The solenoid will have induced current and hence, it will momentarily act as another magnet (electromagnet). What if you passed current through the solenoid using a battery and brought the magnet near its axis?
 
Last edited:
  • #13
Suspend the magnet horizontally using a thread. Connect a metre or so of wire from the + to - of a 1.5 volt battery. Hold the magnet closely over the wire. It will point according to the direction of the current using the Cork Screw Rule.
 
  • #14
berkeman said:
Then you would need to wave one pole of the magnet past a coil of wire and measure the polarity of the voltage induced in the coil. Have you read about magnetic induction yet in your studies? :smile:

We're doing that. Would the north pole make a positive current or a negative current first?
 
  • #15
cnh1995 said:
The solenoid will have induced current and hence, it will momentarily act as another magnet (electromagnet). What if you passed current through the solenoid using a battery and brought the magnet near its axis?

I don't know

tech99 said:
Suspend the magnet horizontally using a thread. Connect a metre or so of wire from the + to - of a 1.5 volt battery. Hold the magnet closely over the wire. It will point according to the direction of the current using the Cork Screw Rule.


thanks :smile:
 
  • #16
Flyx said:
I don't know
cnh1995 said:
What if you passed current through the solenoid using a battery and brought the magnet near its axis?
The solenoid will become an electromagnet. Using the direction of current, you can determine the poles of the electromagnet. Then take the magnet near its axis. You will feel either attraction or repulsion, from which you could tell the polarity of the magnet.
 
  • Like
Likes Flyx
  • #17
cnh1995 said:
The solenoid will become an electromagnet. Using the direction of current, you can determine the poles of the electromagnet. Then take the magnet near its axis. You will feel either attraction or repulsion, from which you could tell the polarity of the magnet.

That's what I was thinking, but I was wondering which direction the current would flow.
 
  • #18
Flyx said:
That's what I was thinking, but I was wondering which direction the current would flow.
Current direction will be simply from +ve terminal to the -ve terminal of the battery(conventional current,of course).
 
  • #19
cnh1995 said:
Current direction will be simply from +ve terminal to the -ve terminal of the battery(conventional current,of course).

Thanks :woot:
 
Back
Top