Calculate Water Depth Using Sonar | Speed of Sound = 5300 km/h

In summary, the depth of water can be determined by using the formula distance= speed * time and depth=distance/2. To convert 870 ms to hours, you can multiply it by the ratios to cancel out the milliseconds and be left with hours. The speed of sound in water is 5300 km/h. Converting this to the correct units and using the given time of 870 ms, the depth of water is approximately 0.64 km.
  • #1
dlre
6
0
Please help! trying to catch up with class! topic: the speed of sound

Homework Statement



Determine the depth of water if an echo using sonar returns in 870 ms and the speed of sound in water is 5300 km/h.

Homework Equations



distance= speed * time
depth=distance/2

The Attempt at a Solution


time= 870s
speed= 5300km/h

--------
i'm stuck at the part on converting ms to h. i think the

the answer i got is 0.64km

870ms= 0.00024167h
distance = 5300*0.00024167 = 1.28
depth= 1.28/2 = 0.64
 
Last edited:
Physics news on Phys.org
  • #2
Will it take some time to come back?
 
  • #3
i really have no idea. i missed two months of physics and now struggling.

i think it took 870 ms to return.
 
  • #4
ms means mili second and mili is 10^-3?
 
  • #5
All units must be in same system (SI).

length in meter
time in second
 
  • #6
is km/hour is SI unit of velocity?
 
  • #7
isn't it?

does it matter?

if we'redoing this by meter and second, then this is my attempt

d= 5300000m/s *0.87 s = 4,611,000m
depth= 4,611,000/2 = 2,305,500

--------
 
  • #8
did you converted hour in sec?? it will be 5300*1000/3600 m/s
 
  • #9
i give up. I'm going to bed!

good night! thanks for helping
 
  • #10
d = v*t = (5300*1000/3600) m/s*(870/1000) s =
 
  • #11
Your answer of .64km looks good to me (and seems like a reasonable depth). So this question seems to be mainly about unit conversions.
Start with 870 ms . Now we know that ms means milliseconds, and that milli means 10^-3
So 870 ms = 870 x 10^-3 s = .87 s

Or another way to think about this is to multiply the 870ms with the correct ratios to cancel out the ms units so that you are left with seconds :

870 ms x [tex]\frac{1s}{1000ms}[/tex] = .87s
Here you are left with seconds; as you can see the milliseconds have canceled out.

You could continue to convert this into hours:

.87s x [tex]\frac{1 min}{60s}[/tex] x [tex]\frac{1 hr}{60 min}[/tex] = 2.416...x 10^-4 hr
Here we are left with hours since the units of seconds and minutes have been eliminated.

Now for the question:

[tex]\frac{5300 km}{1 hr}[/tex] x [tex]\frac{1000 m}{1 km}[/tex] x [tex]\frac{1 hr}{60 min}[/tex] x [tex]\frac{1 min}{60 s}[/tex] = [tex]\frac{1472.222 m}{1 s}[/tex]

[tex]\frac{1472.222 m}{1 s}[/tex] x .87s = 1280.83 m

1280.83 / 2 = 640.4 m or .64 km
 

1. How does sonar calculate water depth?

Sonar uses sound waves to determine water depth. The device sends out a sound pulse and measures the time it takes for the sound to bounce off the bottom of the water and return to the sonar. By knowing the speed of sound in water, the device can calculate the depth based on the time it took for the sound to travel.

2. What is the speed of sound in water?

The speed of sound in water is approximately 5300 km/h. However, this can vary depending on factors such as temperature, salinity, and depth of the water.

3. How accurate is sonar in measuring water depth?

Sonar is a very accurate method for measuring water depth. It can typically measure depths up to 1000 meters with an accuracy of within a few centimeters.

4. Can sonar be affected by external factors?

Yes, sonar can be affected by external factors such as water temperature and salinity. These factors can cause the speed of sound in water to vary, which can affect the accuracy of the depth measurement. Other factors such as air bubbles and debris in the water can also affect the sonar's readings.

5. What are the limitations of using sonar to calculate water depth?

Sonar is limited in its ability to measure water depth in shallow or very turbid water. In these conditions, the sound waves can be absorbed or scattered, making it difficult for the sonar to accurately measure the depth. Additionally, sonar cannot be used in frozen or solid bodies of water.

Similar threads

  • Introductory Physics Homework Help
Replies
4
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
2K
Replies
14
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
5K
  • Introductory Physics Homework Help
Replies
1
Views
3K
  • Introductory Physics Homework Help
Replies
10
Views
1K
  • Introductory Physics Homework Help
Replies
31
Views
2K
Replies
2
Views
3K
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
2K
Back
Top