Calculating capacitance of capacitor filled with 2 dielectrics

AI Thread Summary
The discussion focuses on calculating the capacitance of a capacitor filled with two different dielectrics. The initial approach involved integrating the elemental capacitors as a parallel combination, which led to an incorrect answer. A subsequent attempt to treat the elemental capacitors as being in series yielded the correct result. The user is seeking clarification on the mistake made in the initial parallel assumption. Assistance is requested to identify the flaw in the first method.
darkv0id
Messages
3
Reaction score
0

Homework Statement



A capacitor is formed by 2 square metal plates of edge a and separated by distance d. Dielectrics of dielectrics constants K1 and K2 are filled in the gap as shown.

capacitor1.jpg


2. The attempt at a solution

This was my initial approach:

capacitor.jpg


I integrated the parallel combination of elemental capacitors dC1 and dC2, but I didnt get the correct answer.

Next, I tried taking the elemental capacitors in series instead of parallel:

Untitled.png


This time my answer turned out to be correct.:smile:

Can someone help me identify the flaw in my initial approach? I suspect I was wrong in assuming that the elemental capacitors were in parallel in the first place.

Opinions?
 
Last edited:
Physics news on Phys.org
Anyone ?
 
No one?:frown:

Please, can anyone help me out?
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Trying to understand the logic behind adding vectors with an angle between them'

Thread 'Trying to understand the logic behind adding vectors with an angle between them'

My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
View full post »

Similar threads

Why Capacitors in Parallels vs. Series: Coaxial Capacitor Case
Replies
2
Views
2K
Why can we model spherical capacitor with two dielectrics as two capacitors in series?
Replies
4
Views
2K
Two different dielectrics between parallel-plate capacitor
Replies
6
Views
2K
Calculations involving different Dielectrics and Capacitors
Replies
7
Views
2K
A disconnected capacitor with two dielectrics in parallel
Replies
8
Views
2K
Spherical capacitor RC system -- determine steady state charges
Replies
6
Views
188
Question about charged capacitors and inserting a dielectric into one
Replies
3
Views
2K
Find the charge on the plates of a parallel-plate capacitor w/ dielectric
Replies
3
Views
2K
Electric field between capacitor plates when a dielectric slab is inserted
Replies
14
Views
2K
How Does Inserting Different Dielectric Materials Affect Capacitor Performance?
Replies
9
Views
3K

Hot Threads

Recent Insights

Back
Top