Calculating Current in a Mixed Series and Parallel Circuit

  • Level: High School 
  • Thread starter doublea500
  • Start date
  • Tags Tags
    Law Ohm's law
4 replies · 4K views · last reply
doublea500
Messages
20
Reaction score
0
just a quick question about ohms law (v=ir) concerning when there is a parallel and a series in the same circuit. i know the rules like in a parallel, v total is v1+v2... and in a series it is 1/v+1/v2=1/vt. and that's the opposite for Current. but what do i do when there is a series and a parallel in the same question.

heres a basic question i just made. sorry its a bit dirty.

i just changed the question to help understand the concept better

The problem i have is that i can find Rt but i have no idea what to do with it because... there are 2 different things
 
Attachments
  • Hand-drawn circuit schematic: a 6 V voltage source in series with R1, feeding a parallel network of R3 on one branch and R2 in series with R4 on the other branch, with a V meter across the parallel section. Labels R1=2, R2=3, R3=4, R4=5 and two questions to find current and voltage.
    physics question1.png
    7.4 KB · Views: 555
Last edited:
Looks like homework to me.

Looking at the questions

What do you mean calculate current from R1 etc and voltage from R1 etc?

You calculate current through a resistor and the voltage across a resistor.

If you have to calculate these for each resistor the effective resistance Rt will not help you.
 
Studiot said:
Looks like homework to me.

Looking at the questions

What do you mean calculate current from R1 etc and voltage from R1 etc?

You calculate current through a resistor and the voltage across a resistor.

If you have to calculate these for each resistor the effective resistance Rt will not help you.

so just replace from with through then :D. and how do i find the voltage and current Through these resistors without effective resistance?
 
actually, could i just find the Rt then find the Current in total. and then like separate it using proportions? like say the Rtparallel was 2 and the Rtseries was 2. and Rt in all was 4. Let's say V=8. I am just making this up now, so you don't get confused with the pic on top. so i could do V=IR->8=I*4. Itotal=2. i is the same in a series so each resistor in the series is I=2A and for the Parallel i can do the It=I1+I2... i think i got it.
 
Last edited: