Can an Object in Motion Remain Moving with Balanced Forces?

  • Thread starter Thread starter wasteofo2
  • Start date Start date
  • Tags Tags
    Forces
Click For Summary
An object can remain in motion even when balanced forces are applied, as demonstrated by Newton's first law of motion, which states that motion does not require a net force. Inertia, a property of mass, allows an object to continue moving unless acted upon by an external force. The discussion clarifies that inertia itself is not a force but rather a characteristic of objects. While air resistance and friction are relevant in real-world scenarios, they can be considered negligible for theoretical examples. Therefore, an object on a flat surface can indeed be moving under the influence of balanced forces, as long as no other forces are acting to change its state of motion.
wasteofo2
Messages
477
Reaction score
2
I'm doing a project on isaac Newton for global studies and was trying to find graphics on the internet demonstrating his laws of motion. I came across a website which had a diagram of an object on a totally level surface with a force of n being applied from both the top and bottom and no other forces shown being applied. Then they asked the reader whether or not it was possible for the object to be moving, and I thought of course not, I checked to see what the website said was the answer and they said that an object with equal forces being applied to it from above and below could be in motion. To demonstrate this they showed a picture of a person on a sled who had perviously gone down a hill and was traveling along a straight surface. The website elaborated that the only forces affecting the rider were gravity pulling him towards the Earth and the snow pushing back against gravity.

This instantly seemed wrong to me. Firstly I thought that inertia is a force and must be somehow illustrated. Also, there would be force exerted on him by the air he's displacing, pulling him in all sorts of directions and slowing him. Then there's the drag that the sled would experience due to the snow it's riding on.

But perhaps they just chose a poor example to demonstrate their point.

Essentially, my question is; if you have an object on a flat surface and the only forces being exerted on it are the downward force of gravity and the upward force of the surface it's resting on pushing against gravity, could it be moving?

If an object is moving due to inertia, does it still count as a force?
 
Last edited:
Physics news on Phys.org
Originally posted by wasteofo2
This instantly seemed wrong to me. Firstly I thought that inertia is a force and must be somehow illustrated. Also, there would be force exerted on him by the air he's displacing, pulling him in all sorts of directions and slowing him. Then there's the drag that the sled would experience due to the snow it's riding on.
Inertia is not a force. Consider it as a property of mass.

You are correct that a more realistic situation would consider air resistance and friction. But these forces would tend to slow down the sled, not keep it moving. (They are assuming that these forces are small and can be ignored. A reasonable assumption for the exercise.)

The example is meant to illustrate that a net force is not required for motion to occur. This is Newton's first law.
Essentially, my question is; if you have an object on a flat surface and the only forces being exerted on it are the downward force of gravity and the upward force of the surface it's resting on pushing against gravity, could it be moving?
Of course it can.
If an object is moving due to inertia, does it still count as a force?
No. An object can be said to have inertia, but that isn't a force. (A force requires an agent: something to exert the force.) The point of Newton's laws is that force is not needed to maintain motion. The natural inertia of mass keeps things moving (or not moving) until a force compels it to change its motion (speed up, slow down, or turn).
 
Thread 'What is the pressure of trapped air inside this tube?'
As you can see from the picture, i have an uneven U-shaped tube, sealed at the short end. I fill the tube with water and i seal it. So the short side is filled with water and the long side ends up containg water and trapped air. Now the tube is sealed on both sides and i turn it in such a way that the traped air moves at the short side. Are my claims about pressure in senarios A & B correct? What is the pressure for all points in senario C? (My question is basically coming from watching...

Similar threads

  • · Replies 128 ·
5
Replies
128
Views
11K
  • · Replies 75 ·
3
Replies
75
Views
5K
  • · Replies 21 ·
Replies
21
Views
2K
  • · Replies 4 ·
Replies
4
Views
1K
  • · Replies 3 ·
Replies
3
Views
2K
  • · Replies 22 ·
Replies
22
Views
835
  • · Replies 49 ·
2
Replies
49
Views
4K
  • · Replies 14 ·
Replies
14
Views
2K
  • · Replies 5 ·
Replies
5
Views
2K
Replies
6
Views
2K