Making Methane a More Useful Fuel: Catalyst Possibilities?

Click For Summary
SUMMARY

The discussion centers on enhancing methane's utility as a fuel by converting it into longer hydrocarbon chains, specifically aiming for comparability to gasoline. Participants highlight that while methane is already a useful fuel, increasing its energy content requires energy-intensive processes to link CH4 molecules into octane (C8H18) and larger hydrocarbons. Techniques such as the Fischer-Tropsch and Bergius processes are mentioned as methods for producing synthetic liquid fuels, although their efficiency is noted as a concern.

PREREQUISITES
  • Understanding of hydrocarbon chemistry
  • Familiarity with catalytic processes in fuel production
  • Knowledge of the Fischer-Tropsch process
  • Basic concepts of energy content in fuels
NEXT STEPS
  • Research the Fischer-Tropsch process for synthetic fuel production
  • Explore the Bergius process and its applications
  • Study the energy efficiency of hydrocarbon chain synthesis
  • Investigate catalysts used in hydrocarbon chain elongation
USEFUL FOR

Researchers, chemical engineers, and energy sector professionals interested in fuel optimization and synthetic fuel production methodologies.

iwant2beoz
Messages
96
Reaction score
1
This might be a stupid question so forgive me if it is. I am looking for a way to make methane more useful as a fule and it seems to me that to do that I would have to make it into a longer hydro-carbon chane. Is there a catalyst that could be used to do this? Thanks in advance.
 
Chemistry news on Phys.org
Define "more useful as a fuel".
 
Borek said:
Define "more useful as a fuel".
Yeah; by most standards, methane is pretty useful as a fuel.
 
A higher energy content, like propane.
 
It takes energy to make methane have a higher energy content by constructing a longer carbon chain. That's what they do in oil refineries: they break down long-chain molecules into shorter chain stuff, and take short stuff and synthesize longer-chain molecules, until Chief Engineer Goldilocks says the product is "Just right".

http://en.wikipedia.org/wiki/Oil_Refinery
 
iwant2beoz said:
A higher energy content, like propane.
Per what unit? Natural gas is higher per unit mass than propane, but a little lower per unit volume (in liquid form). Still not sure what that has to do with being useful though.
 
Maybe I should rephrase my question. I want to make natural gas comporable to gasoline as a fuel?
 
Then, you'll have to link CH4 molecules until you start to obtain octane [C8H18] and larger molecules. As was stated earlier, it takes energy to do this. It is done somewhat on a limited basis in current petroleum refineries to produce gasoline, diesel fuel, etc., from crude oil feed stock.

There are other processes, like the Fischer-Tropsch and the Bergius processes, which produce synthetic liquid fuels from coal.

http://en.wikipedia.org/wiki/Fischer–Tropsch_process
 
So it technically can be done but its not very efficient. Well thank you
 

Similar threads

  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 2 ·
Replies
2
Views
4K
Replies
23
Views
4K
  • · Replies 2 ·
Replies
2
Views
2K
  • · Replies 4 ·
Replies
4
Views
2K
  • · Replies 1 ·
Replies
1
Views
2K
  • · Replies 3 ·
Replies
3
Views
3K
Replies
25
Views
47K
  • · Replies 10 ·
Replies
10
Views
3K
  • · Replies 16 ·
Replies
16
Views
3K