Commutation process in RLC circuit

1 reply · 2K views · last reply
karlis123
Messages
8
Reaction score
0

Homework Statement



Still can't figure this one out.
All data is on the picture attached.
I have to find the current flowing through E1 after E2 is connected and draw a graph as it changes in time of the process.

I can't do the equations when t=0

Homework Equations


dUc/dt|t=0 =i3(0)/C


The Attempt at a Solution



t=0
i2-i5=i3+i6
L*di2/dt +Uc-R2*i6+r1*i5=E2
Uc-R1*i5=E1-E2
i still miss something, any help would be apritiated
 
Attachments
  • Two circuit schematics with handwritten annotations: the upper one shows E1, L, C, R1, R2 and E2 with the switch and labelled currents i2, i3, i5, i6; the lower pair shows the circuit before commutation (t=0) with I2=E1/R2=5A, Uc=E1=50V, and after commutation (t=inf) with I1=5A, I5=E2/R1=5A, I2=I1+I5=10A.
    IMG_9883.jpg
    21.6 KB · Views: 654
here I have found an example with the equations when t=0
 
Attachments
  • Circuit schematic with voltage source E, inductor L carrying i1, resistors R2 and R3, capacitor C, and a closed switch at t=0, with loop currents i2 and i3 and loops I and II; beside it are Kirchhoff equations (3) and the derived system (4), followed by the same equations evaluated at t=0.
    example.png
    21.9 KB · Views: 656