Double Pendulum Homework: Small Angle Approximation

Click For Summary
SUMMARY

The discussion centers on deriving the equations of motion for a double pendulum using Newton's second law, specifically focusing on the small angle approximation. The key equations to derive are d²θ/dt² + g/l(2θ - φ) = 0 and d²φ/dt² + 2g/l(φ - θ) = 0. Participants highlight the challenges in resolving forces and the role of tension in the system, with one user ultimately opting to use Lagrangian mechanics after struggling with the Newtonian approach. The conversation emphasizes the importance of accurately accounting for the tension in the strings and its relationship to gravitational forces.

PREREQUISITES
  • Understanding of Newton's second law
  • Familiarity with small angle approximation in physics
  • Basic knowledge of pendulum dynamics
  • Ability to resolve forces in a two-body system
NEXT STEPS
  • Study the derivation of equations of motion for double pendulums using Newton's laws
  • Learn about Lagrangian mechanics and its application to complex systems
  • Explore the implications of tension in pendulum systems
  • Investigate the effects of varying angles on pendulum dynamics
USEFUL FOR

Physics students, mechanical engineers, and anyone studying dynamics and motion of pendulum systems will benefit from this discussion.

zell99
Messages
13
Reaction score
0

Homework Statement


A double pendulum consists of light, inextensible strings, AB and BC each of length l. It is fixed at one end A and carries two particles, each of mass m, which hang under gravity. The pendulum is constrained to move in a vertical plane. The angle between the vertical and AB is \theta, which the angle between BC and the vertical is \phi. Show for smll angles about the equilibirium position:
d^2\theta/dt^2 +g/l(2\theta -\phi)=0
d^2\phi/dt^2 +2g/l(\phi - \theta)=0

Homework Equations


Newton's second law.
I shouldn't need to use Langrangian mechanics.

The Attempt at a Solution


I've managed to derive the first equation, first by assuming the tension in BC is mg (small angle approximation) then resolving forces about the top mass, and using the small angle approximation for sin. But I just can't get the second result out. I've tried to do the same this (resolving forces) but I must be making a mistake somewhere. Any help would be appreciated. Thanks
 
Last edited:
Physics news on Phys.org
Strange. I get the following for the force in the tangential direction of the mass at the end of BC:

ma = m \frac{dv}{dt} = m l \, \frac{d^2 \phi}{dt^2} = mg \sin \phi \approx mg \phi

Rearranging gives me:

\frac{d^2 \phi}{dt^2} - \frac{g}{l} \, \phi = 0

This does not look like what you want to show. Hmm...
 
Last edited:
Thnaks for the reply. I think what you're missing, and what I can't get the right value for, is that now the tension is no longer perpendicular to the gravitational force, due to the combination of strings, for the bottom mass. This will lead to an extra term but I can't get it to come out correctly.
If anyone knows I'd really appreciate it.
Thanks
 
zell99 said:
Thnaks for the reply. I think what you're missing, and what I can't get the right value for, is that now the tension is no longer perpendicular to the gravitational force, due to the combination of strings, for the bottom mass. This will lead to an extra term but I can't get it to come out correctly.

Who said the tension is perpendicular to the graviational force? The tension is always parallel to the string.
 
Sorry my fault, should have been more accurate with words, (I don't think what I meant was right either). I'm still confused so if someone is able to derive or give me a hint towards the second equation I'd be really grateful.
Thanks
 
Anyone? please.
 
It's hard to say where you've made the mistake.

There's obviously more work involved using Newton's equations than Lagrange's -- therefore, you may have to post all your working for help...

(At soem point, you should have 4 equations for \ddot\theta, \dot\theta^2, \ddot\phi, \dot\phi^2 from which the tensions in terms of \ddot\theta, \ddot\phi, \theta, \phi can be found...)
 
Thanks for the reply. I gave up in the end and used the Langrange.
 

Similar threads

  • · Replies 20 ·
Replies
20
Views
2K
  • · Replies 15 ·
Replies
15
Views
2K
  • · Replies 32 ·
2
Replies
32
Views
2K
Replies
5
Views
1K
  • · Replies 9 ·
Replies
9
Views
2K
  • · Replies 1 ·
Replies
1
Views
1K
  • · Replies 3 ·
Replies
3
Views
2K
  • · Replies 21 ·
Replies
21
Views
3K
Replies
4
Views
4K
  • · Replies 26 ·
Replies
26
Views
3K