Finding a Lost Key with a Searchlight: Calculate the Angle

  • Thread starter itryphysics
  • Start date
  • Tags
    Angle Lost
In summary, the problem involves using Snell's law to find the angle at which a searchlight must be pointed in order to locate a lost key at the bottom of a tank filled with a fluid with an index of refraction of 1.68. The light enters the water 1 m from the edge of the tank and the key is located 8.176 m below the surface and 6.84 m from the edge of the tank. By drawing a picture and using Snell's law, the angles θ1 and θ2 can be determined and added together to find the necessary angle for the searchlight.
  • #1
itryphysics
114
0

Homework Statement



A search light is being used at the edge of a tank to find a lost key at the bottom of the tank. The tank is filled to the top with a fluid for which the index of refraction is 1.68. The key is 8.176 m below the surface and 6.84 m from the edge of the tank. At what angle to the normal will the searchlight have to point in order to locate the key if the light enters the water 1 m from the edge of the tank?

Homework Equations



snell's law
n1 sin theta1 = n1 sin theta2


The Attempt at a Solution



inverse sin of 6.84/8.176

inverse sign of 7.84/8.176

and then i added those two together..

Im totally lost and don't understand what to do . Any help will be much appreciated =]
 
Physics news on Phys.org
  • #2
Draw a picture first off.

The θ2 is given by tan-1 of (6.84 - 1)/8.176

The rest should be easy peasy.
 
  • #3
so everything i did was ok except for I use inverse of tan and not sin to find the angles?
 
  • #4
itryphysics said:
so everything i did was ok except for I use inverse of tan and not sin to find the angles?

Not exactly. You failed to account for the light entering the water at 1m.

In the drawing then your net x displacement over the y depth describes θ with respect to the vertical.

To determine the θ1 of course you use sin-1
 
  • #5
im lost. sorry . so what is wrong with the way i was calculating theta 1?
 
  • #6
itryphysics said:
im lost. sorry . so what is wrong with the way i was calculating theta 1?

You use Snell's law. So knowing θ2 from the tan-1 and ...

n1*sinθ1 = n2*sinθ 2

1*sinθ1 = 1.68*sinθ2

To determine θ1 you take the sin-1.

Isn't that what you were doing before?
 

Similar threads

Back
Top