Frequency and wavelength affect the overall design of a system?

AI Thread Summary
The discussion centers on how frequency and wavelength influence system design, particularly regarding component resonance. Components have natural frequencies, and when operational frequencies match these, resonance can occur, potentially causing damage. To mitigate this, designers should adjust either the natural or operational frequencies during the design phase. However, the context of the system is crucial, as resonance can be beneficial in applications like musical instruments. The original poster is encouraged to provide more specific details about their system to receive more tailored advice.
bobby
Messages
2
Reaction score
0
need help urgently

How do the choices of frequency and wavelength affect the overall design of a system? Of components within the system?
 
Engineering news on Phys.org
Each component has got its own natural frequency. and your operation casue some vibartions with some frequency over those components. when both the (Nat freq & Opr. freq) matches, the component will be subjected to tremendous amount of vibration which called resonance.
Hence, to avoid resonance, you should either correct Nat freq of comp or the operation freq whicever is possible during design stage.
I hope it helps you and your doubt was the same of this kind.
 
Without knowing what type of system you are talking about and what it is supposed to do, it's a meaningless question.

The previous answer assumes that resonance may occur, and if it occurs it is a bad thing. Both those assumptions are false for many systems.
 
The OP could be asking about musical instruments. In that case resonance is a desired characteristic. The OP needs to be MUCH more specific with his question.
 
right questions will get right reply!
 
I am srry I forgot to add...This question is of data communication subject
 
Data communication.

Hmm, well, if your infrared fibreoptic link had a wavelength of 2m instead of 1,000nm, then it wouldn't work very well.



Come on bobby, if you actually want an answer, how about putting some effort into your question?
 

Similar threads

Colour depends on wavelength or frequency?
Replies
22
Views
1K
Sizing corner reflectors for frequencies in the audible range
Replies
8
Views
3K
I What was the role of frequency in the Michelson-Morley experiment's null result?
Replies
3
Views
1K
Quantitative Risk Assessment Of buried crude Oil Pipelines
Replies
7
Views
3K
Engineering Book on Aircraft Engine Lubrication/Oil System Design
Replies
5
Views
3K
B Frequency of Gravitational Waves: Limit & Possibilities
Replies
15
Views
2K
Help with understanding of RF theory-Kinetic inductance parametric amp
Replies
1
Views
2K
A How does phase of merging sines affect overall periodic tones?
Replies
18
Views
2K
How Does Snell's Law Affect Wavelength?
Replies
5
Views
3K
Can the Design of a Motorcycle Airbox Affect Engine Noise Resonance?
Replies
10
Views
5K

Hot Threads

Recent Insights

Back
Top