How Can I Automate Two Conveyors with Manual and Automatic Controls?

  • Thread starter Thread starter Celo
  • Start date Start date
  • Tags Tags
    Electrical
Click For Summary
The discussion focuses on automating two conveyors with both manual and automatic controls. The first conveyor requires buttons for forward, backward, and stop functions, while the second conveyor should automatically start 30 minutes after the first, running for 10 minutes and then stopping for 30 minutes. Both conveyors need a manual operation option, an emergency stop feature that shuts down both simultaneously, and indicator lights for operational status and errors. The original poster expresses difficulty in implementing this system and seeks assistance. The issue was ultimately resolved.
Celo
Messages
2
Reaction score
0

Homework Statement



I'm trying to make something like this in PCschematics...I'll try to explaine...sorry my english is not very good...I hope that someone will understand me...Once again sorry for my bad englih

I have 2 conveyors. First conveyor needs to have a button for going forwerd, backwords, and stop. the second conveyor needs to go start byitself after 30 min after the first conveyor started. Then it must go run for 10 min and than stop for 30 min and start and so on. It must also be amualy operated like the first one. So I would have to have somthing like a switch for manual and auto working of conveyor. There also must be a emergency stop that shut down bouth conveyors at the same time. Bouth conveyors need a light when in use also light when something is wrong and red light for emergency stop...I have been trying to resolve this for couple of days now and I can see I need help...So I really hope that someone understand my problem here...

someone please help

Thanks in advance
 
Physics news on Phys.org
SOLVED:smile:
 

Similar threads

Cooling of vegetables with water
  • · Replies 3 ·
Replies
3
Views
1K
How Can I Wire a Start/Stop Button for a Motor Starter with Multiple Contactors?
  • · Replies 2 ·
Replies
2
Views
2K
Safety and the increasing automation of cars
  • · Replies 27 ·
Replies
27
Views
4K
How can I create a roller expansion mechanism for a conveyor system?
  • · Replies 13 ·
Replies
13
Views
3K
How good are automatic watch winding mechanisms?
  • · Replies 22 ·
Replies
22
Views
3K
How do you fabricate microfluidic chips in your lab?
  • · Replies 2 ·
Replies
2
Views
2K
[C] Use recursive function to get the min value of an array
  • · Replies 5 ·
Replies
5
Views
4K
Old fashioned gas stove with automatic lighting - how?
  • · Replies 14 ·
Replies
14
Views
5K
Engineering Why is the voltage source high potential into node 1 at -12 V in this op amp problem?
  • · Replies 15 ·
Replies
15
Views
2K
Need help with balsa tower design
  • · Replies 3 ·
Replies
3
Views
2K