How can I measure the force applied to something?

8 replies · 5K views · last reply
Amarah
Messages
4
Reaction score
1

Homework Statement


For a personal project I am doing, I want to test a range of forces in the horizontal direction, and see how the device I created reacts at different forces. So for example, if I want to apply 5N specifically to a device, to see how it reacts under that force, how would I go about applying it? Like applying a specific amount of force. Because I can measure displacement, and I can push on my device with my own fingers, but I don't know what amount of force I am pushing with. I want to know specifically the amount of force.

Homework Equations



The Attempt at a Solution


Something like a dynamometer, but instead of knowing the force being applied to the dynamometer, I want to replace the dynamometer with my device. And I know spring force meters can measure a force, but I want to take a measured force and apply it to something.
 
Put a platform scale between your finger and the device and push.
Small silver digital pocket scale with a blue LCD display, shown beside its removable grey cover, with a hand placing a small silver device on its platform.


Connect a pull scale (fish scale) to the far side of your device and pull.
Photo of a handheld spring force gauge with a silver cylindrical body, a blue sliding section, a ring at the top and a hook at the bottom, on a white background.
 
Attachments
  • Small silver digital pocket scale with a blue LCD display, shown beside its removable grey cover, with a hand placing a small silver device on its platform.
    images?q=tbn:ANd9GcTbSI5TF-zmfthnlmZ4MUkktjWtrWerHW8zon_0XTcxLC3AtSKQUg.jpg
    5.5 KB · Views: 1,218
  • Photo of a handheld spring force gauge with a silver cylindrical body, a blue sliding section, a ring at the top and a hook at the bottom, on a white background.
    images?q=tbn:ANd9GcS-LahRZkt8HPwiCXIJUPkpCGSL4Z77FQ6QPhL3B_Dzpn1EVes8LA.jpg
    3 KB · Views: 1,270
  • Like
Likes   Reactions: scottdave and Amarah
Tom.G said:
Put a platform scale between your finger and the device and push.
View attachment 222737

Connect a pull scale (fish scale) to the far side of your device and pull.
View attachment 222738

I considered these previously, but I don’t think they’ll work. My device is in a symmetrical (along the y-axis) oval shape, and in typical use, force would be applied to both the long sides (along the x-direction). So I want to apply a force to one end and see how far inwards it will deform (which would also theoretically be happening on the other end since symmetrical...)

So for the latter, I want a push force against the device, so that wouldn’t quite work. For the former, it wouldn’t really reflect the testing conditjons I want, I think. I don’t want to completely smush the device.
 
  • Like
Likes   Reactions: Amarah
Amarah said:
So for the latter, I want a push force against the device, so that wouldn’t quite work. For the former, it wouldn’t really reflect the testing conditjons I want, I think. I don’t want to completely smush the device.
How about a Push/Pull meter like this one?

http://www.4physics.com/catalog/images/ForceMeterPush.png
Photo of a blue push-pull force gauge with a dial, its hook end attached to a clear plastic tray of colourful plastic pieces on a wooden ramp, with a hand pulling it along the ramp.
 
Attachments
  • Photo of a blue push-pull force gauge with a dial, its hook end attached to a clear plastic tray of colourful plastic pieces on a wooden ramp, with a hand pulling it along the ramp.
    ForceMeterPush.png
    30.8 KB · Views: 1,313
  • Like
Likes   Reactions: scottdave and Amarah
Combination of string pulleys and weights?
 
Amarah said:
That looks promising! Would a push force gauge be similar? I think that could work.
That *is* a push force gauge... Notice how it is being used to push that box UP the ramp...? :smile:

Use the link to the picture to get to the website. It looks like they sell several different styles of force gauges.
 
  • Like
Likes   Reactions: Amarah
berkeman said:
That *is* a push force gauge... Notice how it is being used to push that box UP the ramp...? :smile:

Use the link to the picture to get to the website. It looks like they sell several different styles of force gauges.

Thank you so much!
 
  • Like
Likes   Reactions: berkeman