How is the Angular Separation in a Diffraction Grating Calculated?

AI Thread Summary
The discussion focuses on calculating the angular separation in a diffraction grating with 3900 slits per centimeter for mercury's spectral lines at 579 nm and 577 nm. The angular separation is defined as the difference between the angles corresponding to these wavelengths, calculated using the equation d sin(theta) = m * lambda. A participant initially struggles with the calculations, mistakenly obtaining a sin(theta) value greater than 1, but later confirms their method is correct. For the second part of the problem, the Rayleigh criterion is suggested as a method to determine the necessary beam width for resolving the lines. Understanding the derivation of the equations is emphasized for accurate calculations.
WenyiJones
Messages
4
Reaction score
0

Homework Statement


A diffraction grating of 3900 slits per centimeter is used to analyze the spectrum of mercury.
(a) Find the angular separation in the first-order spectrum of the two lines of wavelength 579 nm and 577 nm.
(b) How wide must the beam on the grating be for these lines to be resolved?


Homework Equations



dsin(theta)=m*lumda

The Attempt at a Solution



what is the angular separation? Is it just Theta?
 
Physics news on Phys.org
Yes, the angular separation is theta. You might want to read up on the derivation of the equation (if you haven't) so as to better understand it.
 
The way I read the question, angular separation would be the difference between the two angles (thetas) that you would calculate here.
 
the equation i used was:

maximum equation for multi-slit interference
d sin(theta)=m*lamda

d=distance between two slits
m=the interger called the order (bright spots)
theta=angular seperation
lamda=wavelength

but when i plugged in numbers, the sin(theta) i got was easily over 1, that is obviously wrong. what's wrong with it?
 
okay, the whole time i was calculating wrong.

it's correct!

how about (b)?
 
I should think it has to do with the Rayleigh criterion.
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

Diffraction pattern from a grating
Replies
3
Views
872
Calculating the Number of Lines for a Diffraction Grating
Replies
3
Views
2K
Number of bright fringes given by diffraction grating on a screen
Replies
6
Views
3K
Maxima in a diffraction grating
Replies
2
Views
3K
Diffraction Grating: Possible variables for Experiment
Replies
5
Views
2K
Diffraction Grating wavelength
Replies
3
Views
2K
How Does a Diffraction Grating Resolve Different Wavelengths of Sodium Light?
Replies
10
Views
2K
Diffraction grating, distances between maxima
Replies
3
Views
5K
Diffraction Grating Question, Dispersion and Resolving
Replies
2
Views
4K
Diffraction grating problem involving Snell's Law
Replies
3
Views
5K

Hot Threads

Recent Insights

Back
Top