How long to drain a gas cylinder?

elwoood
Messages
2
Reaction score
0
How long to drain 228 CF of gas at 2640 psi thru a 3/32 nozzle at 15 psi?
 
Engineering news on Phys.org
What kind of gas?
 
SteamKing said:
What kind of gas?
nitrogen from a K cylinder
 

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Similar threads

Predicting Remaining Pressure in Compressed Gas Cylinder
Replies
3
Views
3K
Time to empty gas cylinder (problem worked, but would like feedback)
Replies
7
Views
3K
How to Calculate Gas Cylinder Drain Time from Pressure to Atmospheric?
Replies
9
Views
3K
Constant pressure process (piston) on gas violates Newtons 2nd law?
Replies
7
Views
2K
Total force from air spring model (double acting piston)
Replies
8
Views
2K
Need Help figuring out this gas cylinder volume issue
Replies
11
Views
3K
I Calculating Pressure Change Filling Gas Cylinders
2
Replies
69
Views
6K
I Calculating Cooling Effect in Gas Cylinder Expansion
Replies
3
Views
4K
Modeling Air Compression Cylinder
Replies
45
Views
5K
B Gas cylinder at constant pressure being exposed to atmosphere, how?
Replies
8
Views
2K

Hot Threads

Recent Insights

Back
Top