Mechanical Engineering projects

AI Thread Summary
Neeraj Kirola, a final-year mechanical engineering student, is seeking suggestions for project ideas as he struggles to find quality resources online. He emphasizes the importance of these projects for his academic requirements. Other forum members question the necessity for more projects, prompting Neeraj to clarify his need for guidance in selecting a suitable project. The discussion highlights the challenge students face in sourcing innovative project ideas. Overall, the forum aims to assist Neeraj in finding valuable project suggestions.
neerajkirola
Messages
3
Reaction score
2
TL;DR Summary
Suggestions regard Mechanical Engineering
Hi Everyone,
My name is Neeraj Kirola. I am a final-year student of Engineering. I need suggestions regarding mechanical engineering projects; I found many Websites on the Internet like this, but I need many more projects.
Can anyone Suggest more? 🙏

Thanks In Advance.
 
Engineering news on Phys.org
Welcome to PF.

Why do you need more mechanical engineering projects?
 
Baluncore said:
Welcome to PF.

Why do you need more mechanical engineering projects?
I am in my final year of engineering (Mechanical Engineering), and in practice, we need to submit a project, so I was searching on the Internet and could not find any good sources. That is why I asked the query; I thought I might get a positive answer on this platform. Can you please help me with this?
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

Mechanical/Aerospace Engineering Undergrad Senior Design Project
Replies
3
Views
2K
Soft/Stable Movement for Parallelogram Mount with Wheel + Printhead
Replies
1
Views
36
Insights for a Mechanical Engineering student
Replies
11
Views
2K
Mechanism Needed for a Compact, High-Torque Transradial Prosthetic Arm
Replies
4
Views
1K
Calculating Energy Requirements for HRSG in Hydrogen Power Plants
Replies
2
Views
1K
Resources for designing a planetary gearbox
Replies
3
Views
1K
Math vs. FE Method: Comparing Mechanical Engineering Focus
Replies
2
Views
1K
Software suggestions for simulating mechanical systems and mechanisms
Replies
17
Views
2K
Fresh Mechanical Engineering Project Ideas for Students
Replies
2
Views
2K
Vibrations, Modal Analysis and Mechanical Systems
Replies
5
Views
3K

Hot Threads

Recent Insights

Back
Top