Momentum eq for cylindrical element

shair44
Messages
6
Reaction score
0
Help!

I trying to improve momentum eq for cylindrical element coordinate by using vector method or may other methods

Please give me response v.ergent . Thanks! =)
 
Engineering news on Phys.org
by the way i am looking hwo to express the momentum eq for cylinder
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »

Similar threads

Finite element method approximation
Replies
0
Views
1K
Angle of twist from in-plane displacements in FEA
Replies
5
Views
2K
[ANSYS] Meshing based on Keypoints
Replies
0
Views
1K
Pressure rate increase between two vessels
Replies
5
Views
2K
What is the most incompressible elastomer?
Replies
2
Views
1K
MCNP - z-coordinates of cylindrical mesh >0?
Replies
2
Views
2K
I Vector calculus: line element dr in cylindrical coordinates
Replies
11
Views
2K
Sound Generation from Fluid Flow
Replies
4
Views
2K
Pumping power calculation of a vertical closed-loop system
Replies
4
Views
3K
Inlet and outlet design for a cylindrical tank
Replies
4
Views
3K

Hot Threads

Recent Insights

Back
Top