Need solution to view through glass at near zero angle

2 replies · 3K views · last reply
lemd
Messages
31
Reaction score
0
Hi,

I am designing a device which has cameras need to see through a sheet of glass at angle very low, near zero. And at that angle most of light is reflected so it is very hard to see.

- The surface of the transparent material must be flat and smooth
- The camera must see outside object at angle smaller than 5 degree
- Optical devices could be arranged below the transparent surface, e.g mirror, prism, but the main problem is that most light is reflected and doesn't go inside

I wonder is there any solution for this? I.e some kind of coating to let light go through at low angle? Any help would be appreciate

Please refer to image below:

Diagram of a box with a thick blue transparent material sheet across its top, a red camera inside the box labelled 'this camera must see the outside object through glass', and a green circle labelled 'Outside object' with a green arrow angled toward the glass.


Regards
 
Multiple layers with appropriate refractive index (and thickness, but that makes the thing sensitive to the angle) on top of your material can increase the fraction of light going through.
 
lemd said:
Hi,

I am designing a device which has cameras need to see through a sheet of glass at angle very low, near zero. And at that angle most of light is reflected so it is very hard to see.

- The surface of the transparent material must be flat and smooth
- The camera must see outside object at angle smaller than 5 degree
- Optical devices could be arranged below the transparent surface, e.g mirror, prism, but the main problem is that most light is reflected and doesn't go inside

I wonder is there any solution for this? I.e some kind of coating to let light go through at low angle? Any help would be appreciate

Please refer to image below:

Diagram of a box with a blue transparent material forming its top, a red camera inside pointing up toward the glass, and a green arrow from an outside object at upper right toward the glass at a shallow angle.


Regards

You want an anti-reflection coating - these work as the previous poster described.

Something like this:

http://www.edmundoptics.com/optics/...nti-reflection-ar-coated-plastic-windows/3365