Negative value when calculating the distance

  • Thread starter Thread starter Anna55
  • Start date Start date
  • Tags Tags
    Negative Value
AI Thread Summary
A 1000 kg car traveling at 25 m/s skids to a stop due to braking, with a coefficient of friction of 0.95. The formula for distance to stop involves acceleration, which is negative due to deceleration. The calculation shows that the distance required to stop is 33.6 meters, correcting the initial negative value derived. Proper notation and understanding of negative acceleration clarify the solution. The final answer for the stopping distance is confirmed as 33.6 meters.
Anna55
Messages
20
Reaction score
0
A 1000 kg car traveling rightward at 25 m/s slams on the breaks and skids to a stop (with locked wheels). Find the distance required to stop it. Coefficient of friction between the tires and the road is 0.95. Let g=9.8 m/s^2

Solution:
2aΔx=vf2- vo2
a=µg
2 µg Δx=vf2- vo2
vf=0
2 µg Δx=- vo2
Δx=- vo2/2 µg
Δx=-252/(2×0.95×9.8)
Δx=-33.6 m

The answer became -33.6 m. Why is the value negative? The correct answer is 33.6. Thank you in advance!
 
Physics news on Phys.org
The acceleration is negative, a=-µg.

ehild
 
If I have understood this correctly, the solution should be this:

2aΔx=vf2- vo2
a=-µg
2 -µg Δx=vf2- vo2
vf=0
2 -µg Δx=- vo2
Δx=- vo2/2 -µg
Δx=-252/(2×-0.95×9.8)
Δx=33.6 m
 
To denote power, use "^". Use parentheses when multiplying with a negative number. 2 -µg Δx means subtraction. Correctly: 2(-µg)Δx or -2µg Δx. And 25^2=625.

Written correctly your derivation, it looks :

2aΔx=vf^2- vo^2
a=-µg
2 (-µg) Δx=vf^2- vo^2
vf=0
2 (-µg)Δx=- vo^2
Δx=- vo^2/(-2µg)
Δx=-625/(2×(-0.95)×9.8)
Δx=33.6 m

ehild
 
Thank you very much ehild! I understand now.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top