Newton's Laws Questions + Friction. Very tricky and help appreciated

AI Thread Summary
The discussion focuses on understanding Newton's laws and friction in various physics problems. Participants seek guidance on how to approach calculations involving forces, mass, and acceleration without direct answers. Key points include the importance of recognizing net forces, especially in scenarios involving elevators and friction, where constant velocity implies no net force. Additionally, there is clarification on the relationship between the forces exerted by objects, such as an apple and Earth, emphasizing that the apple's force does not significantly affect Earth's motion. Overall, the conversation aims to enhance comprehension of fundamental physics concepts rather than just solving specific problems.
jambition
Messages
5
Reaction score
0
I AM NOT INTERESTED IN DIRECT ANSWERS! I'm just stuck on how to process these questions and just need a little guidance on what I'm doing wrong. I will be forever indebted and I am more interested in learning how to solve for these. Thank you!


1. A person weighing 0.9 kN rides in an elevator that has a downward acceleration of 2.6 m/s2.The acceleration of gravity is 9.8 m/s2. What is the magnitude of the force of the elevator floor on the person? Answer in units of k

1a. Relevant equations

f=m x a

1b. The attempt at a solution
Find mass of person (should be 900 N) but should I find the mass in kg?
Combine both accelerations and multiply by mass in kg?

2.When you drop a 0.35 kg apple, Earth exerts a force on it that accelerates it at 9.8 m/s2 toward the earth’s surface. According to Newton’s third law, the apple must exert an equal but opposite force on Earth.
If the mass of the Earth 5.98 × 1024 kg, what is the magnitude of the earth’s acceleration toward the apple?
Answer in units of m/s2.


2a. Relevant equations.
f= m x a?

2b. Attempt
The force the apple creates is 3.43. Do I set that equal to Eaarth's force and divide by Earth's mass? I get something like 5.74e-25. That can't be right.

3.The force of friction acting on a sliding crate is 232 N. How much force must be applied to maintain a constant velocity? Answer in units of N

3a. Equation
Not sure which one to use.

3b.Attempt
Do I find the mass of the crate? Acc. has to be 9.8 but how would i find for constant velocity?
 
Physics news on Phys.org
jambition said:
I AM NOT INTERESTED IN DIRECT ANSWERS! I'm just stuck on how to process these questions and just need a little guidance on what I'm doing wrong. I will be forever indebted and I am more interested in learning how to solve for these. Thank you!


1. A person weighing 0.9 kN rides in an elevator that has a downward acceleration of 2.6 m/s2.The acceleration of gravity is 9.8 m/s2. What is the magnitude of the force of the elevator floor on the person? Answer in units of k

1a. Relevant equations

f=m x a
It's f_net = m x a, where f_net is the algebraic sum of the force of gravity (the weight) on the person and the force of the floor (the normal force) on the person
1b. The attempt at a solution
Find mass of person (should be 900 N) but should I find the mass in kg?
the weight of the person is 900 N. The person's mass in kg is calculated by m=weight/g
Combine both accelerations and multiply by mass in kg?
No, find the net force acting on the person , and set it equal to m x a. The net force is always in the direction of the acceleration.
2.When you drop a 0.35 kg apple, Earth exerts a force on it that accelerates it at 9.8 m/s2 toward the earth’s surface. According to Newton’s third law, the apple must exert an equal but opposite force on Earth.
If the mass of the Earth 5.98 × 1024 kg, what is the magnitude of the earth’s acceleration toward the apple?
Answer in units of m/s2.


2a. Relevant equations.
f= m x a?

2b. Attempt
The force the apple creates is 3.43. Do I set that equal to Eaarth's force and divide by Earth's mass? I get something like 5.74e-25. That can't be right.
Why not? you don't expect the apple to lift up the Earth significantly, do you? :wink:
3.The force of friction acting on a sliding crate is 232 N. How much force must be applied to maintain a constant velocity? Answer in units of N

3a. Equation
Not sure which one to use.

3b.Attempt
Do I find the mass of the crate? Acc. has to be 9.8 but how would i find for constant velocity?
This problem assumes the crate is on a rough horizontal surface. If it's moving at constant velocity, there is NO acceleration (per Newton 1). So what force must be applied if it is moving at constant velocity?

Welcome to Physics Forums!
 
Ah thank you! I think I'm getting somewhere now! Problem 2 was correct after all :smile:

For problem 3, I'm still not understanding what I'm looking for exactly. The follow up question to that problem asks for a net force so I must be looking for some kind of acceleration, no?
 
jambition said:
For problem 3, I'm still not understanding what I'm looking for exactly. The follow up question to that problem asks for a net force so I must be looking for some kind of acceleration, no?
Not if the net force is zero, that's Newton 1:wink: 'An object in motion at constant speed moving in a straight line will remain at constant speed in a straight line unless acted on by a net unbalanced force. No net force, then no acceleration, F_net =0.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top