Objects Moving with a Constant Velocity & Constant Acceleration

Click For Summary
An object starts at a velocity of +21 m/s and decelerates at -5 m/s², coming to rest after 4.2 seconds and traveling 132.2 meters. The second object, moving at a constant speed of 19 m/s, begins its motion 3 seconds later. To find when the two objects cross paths, their position equations must be set equal, accounting for the first object's earlier start. The correct approach involves using the equations for both objects and solving for time, ensuring to adjust for the 3-second delay of the second object. The discussion emphasizes the importance of correctly applying the equations of motion and managing signs for acceleration.
Naeem
Messages
193
Reaction score
0
Q. An object starts at time t = 0 with a velocity of v0 = + 21 m/s and undergoes a constant acceleration of a = -5 m/s^2.

a) How far from its starting ( t = 0 ) is the object at time at which it comes to rest?


Solution:

Since, the object undergoes constant acc. constant acceleration equations may be applied.

Therefore,

We need to find the time 't' first,

so, v = v0 + at ( It is going to rest , so v = 0 m/s )


-v0 = at

Given a = -5 m/s^2.

Plugging in we get t = 4.2 seconds, which I believe is right.

Then, using:

x -x0 = v0t - 1/2 a*(t2-t1)^2

x0 ----> 0
v0-----> +21 m/s
't' from above ------> 4.2 seconds which is 't2) and t1 = 0 ---> at rest.
'a' from above -------> -5 m/s^2

Plugging in all the know data in the above eqn, then give us.

x = (21 m/s)*(4.2 seconds) - 1/2 ( -5 m/s^2) * ( t2-t1)^2

I got x = 88.2 + 44.1 = 132.2 meters.

Is this correct!

b) Suppose a second object begins moving with a constant speed of v = 19 m/s in the same direction from the same location 3 seconds later. At what time do the paths of these two objects again cross?


If the objects cross, then their x - coordinates, may be set equal to one another and solved for time. That's all I know. I tried to setup by doing the following:

1st case:

v0 = +21 m/s
a = -5 m/s^2
t = 0 at rest

2nd case :

v0 = 19 m/s
and since its constant speed acc. - 0.

setting up the constant acc,equations for the 1st case data:

x = (21m/s)t - 1/2 (-5 m/s^2)t^2

setting up the constant acc, equations for the 2nd case data:

x = (19m/s)t [ and the rest of the terms vanish since speed is constant for the second case )

equating the above we get:

21t + 2.5t^2 = 19t

then, becomes quadratic.

2.5t^2-19t+21t = 0

is this correct so far. Is my reasoning correct for both the parts so far.
and my work!

Can one be kind enough to tell me if something is wrong.

Thanks, for looking
and appreciate some feedback!
 
Physics news on Phys.org
A)

Plugging in all the know data in the above eqn, then give us.

x = (21 m/s)*(4.2 seconds) - 1/2 ( -5 m/s^2) * ( t2-t1)^2

I got x = 88.2 + 44.1 = 132.2 meters.

Is this correct!

If you use a = -5, then you must place a positive instead of the bolded negative above. If you use a = 5, then you can keep it the way it is.

B)

x = (21m/s)t - 1/2 (-5 m/s^2)t^2
Same thing as above.

Your reasoning is correct for this portion, but you need to take into account that the first puck has a 3 second lead! Also note, that they will cross when the first puck is on its way BACK.
 
x -x0 = v0t - 1/2 a*(t2-t1)^2

The above "presumes" that acceleration is in the negative direction. Like whozum said if you use a=5 then the above is ok. I'd advise you to just use

x -x0 = v0t + 1/2 a*(t2-t1)^2

in general... and then plug in the appropriate a. Here you'd plug in a=-5.

Also for your first part... there is a different equation you can use to solve immediately.

d=(v2^2 - v1^2)/(2a)
 
For part b, that means ,change it as follows:

x = (21m/s)t - 1/2 (-5 m/s^2)(t-3)^2

or change the 2nd case, equation, to x = (19m/s)(t-3)

Please advise!
 
Naeem said:
For part b, that means ,change it as follows:

x = (21m/s)t - 1/2 (-5 m/s^2)(t-3)^2

or change the 2nd case, equation, to x = (19m/s)(t-3)

Please advise!

Too many minus signs in your first equation. The general formula is

x = x_0 + (v_0)t + (1/2)at^2

Your a is a negative quantity, so one minus sign in the equation.

Also, the first object starts from x = 0 at t = 0. There should not be a (t-3) in the first equation. The second equation (for the second object) is correct. The two objects will meet when x is the same in both equations. Set your two expressions for x equal to one another and solve for t.
 
Do you have a TI-83? Put it in parametric mode and graph the following to visualize the problem:
X1 = T
Y1 = -5T^2/2 + 19T
X2 = T
Y2 = 21(T-3)
 
The book claims the answer is that all the magnitudes are the same because "the gravitational force on the penguin is the same". I'm having trouble understanding this. I thought the buoyant force was equal to the weight of the fluid displaced. Weight depends on mass which depends on density. Therefore, due to the differing densities the buoyant force will be different in each case? Is this incorrect?

Similar threads

  • · Replies 11 ·
Replies
11
Views
2K
  • · Replies 3 ·
Replies
3
Views
2K
Replies
3
Views
942
  • · Replies 4 ·
Replies
4
Views
4K
  • · Replies 7 ·
Replies
7
Views
1K
  • · Replies 3 ·
Replies
3
Views
889
  • · Replies 5 ·
Replies
5
Views
3K
Replies
13
Views
2K
Replies
3
Views
2K
  • · Replies 2 ·
Replies
2
Views
1K