Op Amp with frequency compensation input

  • Thread starter Thread starter Joseph M. Zias
  • Start date Start date
  • Tags Tags
    Frequency Opamp
AI Thread Summary
The discussion centers on the search for a modern operational amplifier (op-amp) that features a frequency compensation input, similar to the older uA709 model. The original poster is revisiting a feedback loop circuit and has acquired several uA709s but is interested in contemporary alternatives. There is an emphasis on the ability to tailor the op-amp's response for experimental purposes, such as inserting a right half-plane zero in the feedback loop. Participants are encouraged to provide information on available op-amps that meet these specifications. The conversation highlights the need for modern components that retain the unique functionalities of older designs.
Joseph M. Zias
Messages
80
Reaction score
28
Does anyone know of a modern op-amp (available) with a frequency compensation input as the very old 709 had?
 
Engineering news on Phys.org
I'm not finding anything with my searches so far. Can you say more about the application and specs you need to achieve?
 
Revisiting a feedback loop circuit of decades ago. I have two uA709s and 3 more on the way (Ebay). But I thought I would check to see if any "new" op amps have the same feature. Being able to tailor the response allows for some interesting experiments, for example, inserting a right half plane zero in the overall loop.
 

Thread 'Why does the amperage go real high if there is a low voltage short?'

I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
View full post »

Thread 'How might electronics be different if AC voltage was 72V at 45 Hz?'

Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
View full post »
Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'

Thread 'How Does Jaguar's 1980s V12 Dual Coil Ignition System Enhance Spark Strength?'

I have come across a dual coil ignition system as used by Jaguar on their V12 in the 1980's. It uses two ignition coils with their primary windings wired in parallel. The primary coil has its secondary winding wired to the distributor and then to the spark plugs as is standard practice. However, the auxiliary coil has it secondary winding output sealed off. The purpose of the system was to provide a stronger spark to the plugs, always a difficult task with the very short dwell time of a...
View full post »

Similar threads

Op-amp compensation of cascade fudges audio signal oddly
Replies
3
Views
2K
Op-amp Oscillator Circuit Design (10-50 MHz)
Replies
6
Views
3K
Is Analog Computing Making a Comeback in AI Research?
Replies
3
Views
2K
Not able to get the desired output frequency using a Wein Bridge Oscillator
Replies
24
Views
3K
[help] understanding Op-Amp frequency characteristics
Replies
3
Views
2K
Role of gain in amplifier's frequency compensation....
Replies
47
Views
5K
Confusion on: High Pass Filter at Op Amp Input
Replies
6
Views
3K
What's wrong in my LTspice simulation of an Op-Amp integrator circuit?
Replies
9
Views
6K
Opamp multivibrator not oscillating
Replies
8
Views
3K
Amplifier for piezoelectric sensor, OP Amp circuit
Replies
6
Views
5K

Hot Threads

Recent Insights

Back
Top