Power and Efficiency without mass?

In summary, the textbook solution is poor due to incorrect use of units, premature plugging in of numbers, and lack of need to find an energy.
  • #1
sbrads87
1
0
Homework Statement
Possible error in text (has happened before.)
A basketball loses 35% of its kinetic energy when it hits the floor. Initially dropped from a height of 1.2m. How much time will it be in the air between 3rd and 4th bounces?
Relevant Equations
Ek = Eg = mgh = m(9.81)(1.2)

s = v2t-1/2at^2
Really perplexed me as the answer provided does not solve for mass ... seemingly wants to use mass as a unit of height? Or perhaps I'm off base ... really just curious if this is even correct or possible?

Thanks in advance
 

Attachments

  • 20230303_225314.jpg
    20230303_225314.jpg
    32.8 KB · Views: 56
Physics news on Phys.org
  • #2
Sounds okay. Is the answer going to be different depending on the mass of the b-ball ?
 
  • #4
It is correct. The solution shows that the answer is independent of the mass. Look at it this way. If you drop a mass from height ##h_0##, its mechanical energy before the bounce is ##E_0=mgh_0##. If it loses 35% of that during the bounce, it will have ##KE_1=0.65mgh_0## left in the form of kinetic energy.

Question: To what maximum height ##h_1## will the ball rise?
Answer: $$mgh_1=KE_1=0.65mgh_0\implies h_1=0.65h_0.$$Note that the answer is independent of the mass. If you drop two unequal masses, they will hit the floor at the same time; if in addition they lose the same fraction of energy after the bounce, they will rise to the same maximum height.
 
  • Like
Likes Lnewqban
  • #5
The textbook solution is poor in several ways.

1. It plugs in numbers without units. E.g. we read "##mgh=11.8m##" instead of "##mgh=m\cdot 11.8m^2/s^2##". That may be why you thought it was turning mass into a distance.

2. It plugs in numbers too soon. By leaving g as g it would have cancelled out in the first part, as @kuruman shows in post #4. That makes for less work and greater accuracy.

3. It was never necessary to find an energy. Since after three bounces it will only have ##0.65^3## of its initial energy, we know it will rise to a height of ##1.2\cdot 0.65^3=0.33##m. After that, it is just a matter of finding how long it takes to fall to the ground from that height and doubling it.
 

1. What is the relationship between power and efficiency without mass?

The relationship between power and efficiency without mass is that they are inversely proportional. This means that as power increases, efficiency decreases, and vice versa.

2. Can power and efficiency be achieved without mass?

Yes, power and efficiency can be achieved without mass through the use of energy conversion and transfer. This can be seen in renewable energy sources such as solar panels and wind turbines.

3. How does reducing mass affect power and efficiency?

Reducing mass can increase both power and efficiency. This is because a lighter object requires less energy to move, resulting in higher power output and less energy loss, leading to increased efficiency.

4. What factors influence power and efficiency without mass?

The factors that influence power and efficiency without mass include the type of energy conversion or transfer, the design and materials used, and external factors such as temperature and wind speed.

5. Is it possible to have high power and efficiency without mass?

Yes, it is possible to have high power and efficiency without mass. This can be achieved through advanced technology and design, as well as optimizing external factors to maximize energy conversion and transfer.

Similar threads

Replies
32
Views
709
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Introductory Physics Homework Help
Replies
12
Views
847
  • Introductory Physics Homework Help
Replies
13
Views
947
  • Introductory Physics Homework Help
Replies
6
Views
1K
  • Introductory Physics Homework Help
Replies
6
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
189
  • Introductory Physics Homework Help
Replies
3
Views
863
  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
2
Views
1K
Back
Top