Pressure standing wave pattern, change cross sectional area

2 replies · 2K views · last reply
snickersnee
Messages
30
Reaction score
0

Homework Statement



See pictures. There are 2 parts to the problem but I can probably figure out the second part once I get the first part. [/B]

Handwritten-style textbook diagram of a duct with a narrow section of width d on the left (S1) and a wider section of area S2 = 2S1 on the right, with the far ends marked infinity, for a pressure standing wave sketch.


Diagram of a stepped acoustic tube: a narrow section on the left labelled S1 = 2S2 extends from minus infinity, then widens to a section labelled S2 of length lambda/4, with a distance d marked at the step.

Homework Equations



Antinodes (minimum pressure) at
Equation x = nπ/4; n = 1, 3, 5... giving the positions of standing wave nodes or antinodes for odd n.

Nodes (maximum pressure) at
Formula nπ/2; n = 0, 1, 2, 3, ... written as a handwritten-style mathematical expression showing the allowed values of a quantity.
[/B]

Equation for a standing wave:
Equation y = A sin(kx - ωt) + A sin(kx + ωt) = (2A sin kx) cos(ωt), the superposition of two counter-propagating waves forming a standing wave.

The Attempt at a Solution



Other than what I've written above, and that it's sinusoidal, not sure what the problem is looking for here. Any hints would be highly appreciated. Thanks for looking.
 
I think they are asking you to show where nodes and antinodes form. For example you normally get an antinode at the open end of a tube. However I'm not sure what you get at the transition between the two tubes. I never studied that.
 
CWatters said:
I think they are asking you to show where nodes and antinodes form. For example you normally get an antinode at the open end of a tube. However I'm not sure what you get at the transition between the two tubes. I never studied that.
Hi thanks for responding. Here are the formulas for the reflection and transmission coefficients:

Equation for a reflection coefficient R: R = (ρc/S2 - ρc/S1) / (ρc/S2 + ρc/S1) = (S1 - S2) / (S1 + S2).

Equation: tau = 1 - |R|^2 = 4 S1 S2 / (S1 + S2)^2, where tau is the transmission coefficient and R the reflection coefficient.

where S1, S2 are cross sectional areas.

R=1 if S2<<S1, a sudden strong area contraction almost acts as a rigid wall.

R=-1 if S2>>S1, in this case the junction acts almost as a pressure-release surface.