Relating Work Function and Wavelength

AI Thread Summary
Barium has a work function of 2.48 eV, which determines the longest wavelength of light that can cause electron emission. The calculations involve using the equations W = hf and E = hc/λ to find the frequency and wavelength. After determining the frequency to be approximately 5.99e14 Hz, the wavelength is calculated as 5.02e-7 m. The relationship between frequency and wavelength is inversely proportional; as frequency increases, wavelength decreases. The discussion confirms that the calculations are on the right track.
ri0t
Messages
5
Reaction score
0

Homework Statement


Barium has a work function of 2.48 eV. What is the longest wavelength of light that will cause electrons to be emitted from barium?

Homework Equations


W = hf○
hf = W + Ek
E = hf = hc/λ

The Attempt at a Solution


1 eV/1.6e-19 C = 2.48/X
X = 3.97e-19

W=hf○
3.97e-19/6.63e-34f
f=5.99e14 Hz

Now I'm lost...Anybody care to help? :)
 
Physics news on Phys.org
So what's the relationship between frequency and wavelength? You've already used it (look at equation 3).
 
hage567 said:
So what's the relationship between frequency and wavelength? You've already used it (look at equation 3).

I think I've figured out the problem using v=fλ, 3.0e8 = 5.98e14λ, λ=5.02e-7m.

Also the answer to your question is that as frequency increases, wavelength decreases.

Would be awesome if you could tell me I'm on the right track, and of course if I'm not, as well.
 
Yes, you are right.
 
Thanks much.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...

Similar threads

Replies
4
Views
3K
Replies
1
Views
2K
Replies
1
Views
2K
Replies
2
Views
2K
Replies
8
Views
3K
Replies
1
Views
5K
Replies
2
Views
6K
Back
Top