Solve for Req with T to Delta Transform

2 replies · 2K views · last reply
zr95
Messages
25
Reaction score
1

Homework Statement


Find Req in the given circuit
Resistor network with 30 Ω, 20 Ω, 12 Ω, 25 Ω, 60 Ω, 10 Ω, 5 Ω and 15 Ω resistors, with two terminals on the left side.


Homework Equations


Series: req = r1+r2...
parallel: 1/req = 1/r1 + 1/r2 ...

The Attempt at a Solution


Without redrawing the circuit I do:
12||60 = 10
10+20 = 30
30 || 30 = 15
15+10 = 25
25||25 = 12.5
12.5+15+5 = 32.5 = Req
This is the correct answer.

Circuit schematic with a delta-wye transformation drawn in red: resistors 30 Ω, 20 Ω, 25 Ω, 10 Ω, 60 Ω, 12 Ω, 5 Ω and 15 Ω, with handwritten red values 36, 108 and 180 marked on the transformed delta branches.

However if I redrew the T to a delta I no longer can get the right answer.
108 || 0 = 0
(36 || 30) || (180 || 10) = 6
6||25...
and so on

Where am I going wrong in my logic? Am I not allowed to do this sort of transformation on this problem?
 
Attachments
  • Resistor network with a Y-to-delta transformation worked by hand, showing 36, 180, 108 and 60 ohm labels beside a circuit with 5 ohm, 15 ohm, 20 ohm, 25 ohm and 60 ohm resistors and terminals a and b.
    upload_2016-9-26_13-9-38.png
    76.5 KB · Views: 574
zr95 said:
(36 || 30) || (180 || 10) = 6

Why is the 180 in parallel with the 10?
 
I completely looked over the 25 ohm resistor when I did that. Thanks.