Soundwave Intensity & Sound Level

  • Thread starter Thread starter tokuroka
  • Start date Start date
  • Tags Tags
    Intensity Sound
AI Thread Summary
The discussion focuses on calculating sound intensity and sound level from a given sound wave amplitude of 5 X 10^-5 N/m^2. Participants clarify that sound intensity can be derived from sound power and area, while sound pressure level is calculated using the formula L(dB) = 20*Log(P/Pref), resulting in approximately 8 dB. The correct sound intensity is found to be 6.3 X 10^-12 W/m^2, using the reference intensity of 10^-12 W/m^2. The original poster acknowledges a misunderstanding of the formulas used, highlighting the importance of accurate calculations for test preparation. The discussion emphasizes the relationship between sound pressure, intensity, and their respective calculations.
tokuroka
Messages
5
Reaction score
0

Homework Statement


The amplitude of a soundwave is 5 X 10 ^-5 N/m^2
a) What is the intesity of the sound energy from this sound wave?
b) What is the sound level?

The Attempt at a Solution



Well I believe that Sound intensity is Power/amplitude. However, i only have the amplitude so.. does that mean that my problem is impossible?
 
Physics news on Phys.org
L (dB) = 20*Log(P/Pref) = 10*Log(I/Iref)

According to the units, you are given the pressure (50 uN/m^2 = 50 uPa). Sound Pressure Level is 20*Log(P/Pref) where Pref is 20uPa. You get around 8 dB.

Sound Intensity = Sound Power / ***Area***. Now this 8 dB is just a ratio and is also equal to 10*Log(I/Iref) where Iref is 10^-12 W/m^2. You get 6.3*10^-12 W/m^2.
 
OH. Thanks for your solution. I realize that I made a complete blunder now. So it was my formula...I get it now, but that does not bode well for my test results =|. Thanks again for your help.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...

Similar threads

Back
Top