The hot-air ballon intersection question.

  • Thread starter Thread starter aeabdo11
  • Start date Start date
  • Tags Tags
    Intersection
AI Thread Summary
The problem involves a hot-air balloon rising at 2.2 m/s and a camera tossed upward at 12 m/s from a point 2.5 m below the balloon. The equations for the heights of both the balloon and the camera were set equal to find the time when they meet. Calculations yielded a height of approximately 3.16 m, but the online homework system flagged the answer as incorrect, suggesting a rounding error or significant figure issue. The confusion arises around significant figures, with some suggesting the answer should be 3.2 for two significant figures, yet this also resulted in an incorrect submission. The discussion highlights the challenge of accurately interpreting significant figures in the context of the problem.
aeabdo11
Messages
3
Reaction score
0
I am close to positive I am going at this problem the correct way, but there seems to be some error somewhere. This problem is from online homework.

Homework Statement



A hot-air balloon has just lifted off and is rising at the constant rate of 2.2 m/s. Suddenly one of the passengers realizes she has left her camera on the ground. A friend picks it up and tosses it straight upward with an initial speed of 12 m/s.

If the passenger is 2.5 m above her friend when the camera is tossed, how high is she when the camera reaches her?
Express your answer using two significant figures.

Homework Equations



X=Xo+Vot+(.5)at^2

The Attempt at a Solution



So I know I need to set the two equations equal and solve for time.

2.5+2.2t=12t-(.5)(9.81)t^2

Solving for t (using quad. equation) gives solutions as t=.3 , t= 1.7

Now I plug the time into the first equation and solve for x for the hot-air balloon at .3 seconds.

2.5+2.2(.3) = 3.16 m

As should be the case, I get the same answer when figuring x for the camera:

12(.3)-(.5)(9.81)(.3)^2= 3.158 m

When I plug this answer into the online homework it says, "Not quite. Check through your calculations; you may have made a rounding error or used the wrong number of significant figures."

I have tried the following answers, none of which work: 3.1, 3.15, 3.2

PLEASE HELP ME FIND WHAT I'M MISSING PLEASE!

Thanks a lot.
-Anthony
 
Physics news on Phys.org
Your equation is correct. Since the online homework website is saying that you're having some kind of rounding error, I went on checking the values. It appears that the actual value should be approximately 3.16045. Try to input 3.16 as an answer there.
 
I would have already tried that answer but the question asks for the answer to be in only two significant figures. "3.16" is three figures is it not (this significant figure thing is a bit confusing)?
 
aeabdo11 said:
I would have already tried that answer but the question asks for the answer to be in only two significant figures. "3.16" is three figures is it not (this significant figure thing is a bit confusing)?
In case of 'two significant figures', the answer should definitely be 3.2
 
Yeah Iv'e tried it...says incorrect.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top