Thermal efficiency formula for steam turbine with extraction

4 replies · 2K views · last reply
Amr Ali 33
Messages
9
Reaction score
0
guys i just wanted to know the formula by which i can calculate the thermal efficiency of a pass out steam turbine( a steam turbine with an extraction for process ) I've attached a simple diagram explaining my problem can anyone please help !
 
Attachments
  • Schematic of a steam turbine drawn as a tapered shape with vertical blade lines, a steam inlet on the left labelled 580 psi, 750 F, a process extraction below labelled 175 psi, 580 F, extraction for process, an exhaust labelled 13 inch hg, and an output circle on the right.
    Untitled.png
    3.7 KB · Views: 664
You'll need more information than what is shown on the diagram, specifically the mass flow rates into the turbine and out the exhaust and extraction line, and you'll need to know the turbine work output. The exhaust conditions of 13" Hg are also a little ill-defined. Calculating the thermal efficiency of this machine is what a First Law type of analysis gives you.
 
thanks , I've adjusted the diagram and added the data u requested i hope it's ok now , i would like to say that this is a very old power plant and that's what i could get out of it so please simplify the problem as much as the first law tolerates
 
Attachments
  • Schematic of a steam turbine with extraction: inlet steam m_s = 64860.01 kg/hr at T = 750 F, P = 580 psi; extraction line m_1 = 25392.69 kg/hr at T = 580 F, P = 175 psi; exhaust at T = 220 F, P = 8.84 psia; turbine drives a generator producing 3.1 MW.
    Capture.PNG
    23.8 KB · Views: 727
Last edited:
Amr Ali 33 said:
thanks , I've adjusted the diagram and added the data u requested i hope it's ok now , i would like to say that this is a very old power plant and that's what i could get out of it so please simplify the problem as much as the first law tolerates

From this point, it's a bit of a slog with a calculator.

The thermal efficiency of the turbine = 1 - Work output / {Q(in) - [Q(out) + Q(ext)]}

You'll have to get some steam tables and look up the enthalpies of the steam at the inlet, the extraction, and the exhaust to calculate the amount of heat flowing thru the system. The generator output is turned into a heat equivalent at he rate of 3412.14 BTU/kW-hr