Today I Learned
- Thread starter Greg Bernhardt
- Start date
Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
6,976 replies · 556K views
Physics news on Phys.org
zoobyshoe
- 6,514
- 1,255
Today I learned how to remove a chuck from a drill:
The information that the holding screw inside the chuck is left-handed was invaluable.
The information that the holding screw inside the chuck is left-handed was invaluable.
Silicon Waffle
- 160
- 202
I learned that snakes, worms and spiders are tailless.
- 19,385
- 15,622
Today I learned why we get goosebumps. I always took it literally and assumed it was because a goose's hair will fluff up when it's cold, but It's actually because we evolved from animals with fur and when you have fur getting cold is somewhat alleviated by causing your hair to fluff up. We make the same motion (goosebumps) we just don't have any fur to stand up. Same reason as geese really but not the right derivation.
Also fright seems to cause hair to stand up on some animals necks so we sometimes get them on our necks when we see something frightening.
Also fright seems to cause hair to stand up on some animals necks so we sometimes get them on our necks when we see something frightening.
Last edited:
zoobyshoe
- 6,514
- 1,255
Yes, the technical term for "goosebumps" is piloerection:phinds said:Today I learned why we get goosebumps. I always took it literally and assumed it was because a goose's hair will fluff up when it's cold, but It's actually because we evolved from animals with fur and when you have fur getting cold is somewhat alienated by causing your hair to fluff up. We make the same motion (goosebumps) we just don't have any fur to stand up. Same reason as geese really but not the right derivation.
Also fright seems to cause hair to stand up on some animals necks so we sometimes get them on our necks when we see something frightening.
Medical Definition of PILOERECTION. : involuntary erection or bristling of hairs due to a sympathetic reflex usually triggered by cold, shock, or fright or due to a sympathomimetic agent.
- 19,385
- 15,622
Cool. Thanks.zoobyshoe said:Yes, the technical term for "goosebumps" is piloerection:
JorisL
- 489
- 189
TIL it's hard to tune a lecture to the students needs when you have both students with dyslexia and dyscalculia.
The first benefit often from a schematic way of summarizing the contents using fewer words/full sentences.
While the latter not only have trouble with arithmetic but also with visual insights.
This means they can have trouble with a schematic way of representing the contents.
Quite the conundrum when trying to (fine-)tune a lesson.
The first benefit often from a schematic way of summarizing the contents using fewer words/full sentences.
While the latter not only have trouble with arithmetic but also with visual insights.
This means they can have trouble with a schematic way of representing the contents.
Quite the conundrum when trying to (fine-)tune a lesson.
Science Advisor
Homework Helper
Dearly Missed
- 9,864
- 4,896
i look for burnt out drills in junkpiles and pillage those left handed screws . They must be made from Unobtanium - can't get them anyplace else !zoobyshoe said:The information that the holding screw inside the chuck is left-handed was invaluable.
zoobyshoe
- 6,514
- 1,255
You made me curious. The one I took out of a 3/8 black and decker drill seems to be a 3/16-32 screw, which is a size I have never heard of before. I get a diameter of .186 and 32 TPI.jim hardy said:i look for burnt out drills in junkpiles and pillage those left handed screws . They must be made from Unobtanium - can't get them anyplace else !
I suppose you could call a drill manufacturer and tell them you change your chucks often and are always losing the screws. Maybe they'd send you a box?
Science Advisor
Homework Helper
Dearly Missed
- 9,864
- 4,896
zoobyshoe said:The one I took out of a 3/8 black and decker drill seems to be a 3/16-32 screw, which is a size I have never heard of before. I get a diameter of .186 and 32 TPI.
That seems within tolerance for a 10-32. It an be as small as 0.184 and still meet class 3.
http://www.engineersedge.com/screw_threads_chart.htm
0.1861 would be smack in the middle of grade 2.
from http://www.engineersedge.com/thread_strength/thread_classes.htm
old jim
zoobyshoe
- 6,514
- 1,255
Of course. I don't know why I dismissed that. A left handed 10-32 screw might be easier to find than a left handed 3/16-32, heh heh.jim hardy said:That seems within tolerance for a 10-32.
wolram
Gold Member
Dearly Missed
- 4,411
- 552
Today i learned that costalota means taking two women shopping.
OmCheeto
Gold Member
- 2,533
- 3,634
Last week, I noticed that my fish made a baby.
Being egg layers, I assumed there were more babies. I've counted about a dozen so far.
But in my searches, I noticed some tiny little "Hydra" looking creatures.
No big deal.
But I googled "Hydra", and discovered that, they are immortal. [ref wiki]
I didn't know such creatures existed.
Being egg layers, I assumed there were more babies. I've counted about a dozen so far.
But in my searches, I noticed some tiny little "Hydra" looking creatures.
But I googled "Hydra", and discovered that, they are immortal. [ref wiki]
I didn't know such creatures existed.
Cruz Martinez
- 116
- 25
Today i learned that a trivial topological space is pseudo-metrizable.
Silicon Waffle
- 160
- 202
Ewww, the white fish...
Lisa!
Gold Member
- 672
- 96
TIRT I'm mainly on my silent mode these days! 

Hornbein
Gold Member
- 4,139
- 3,300
Today I learned that the Earth's axis precesses because the Earth is oblate.
Evo
Staff Emeritus
- 24,114
- 3,277
Zooby's "how-to-tell-if-a-transistor-is-npn or pnp" has been moved to "https://www.physicsforums.com/threads/how-to-tell-if-a-transistor-is-npn-or-pnp.847755/ as it's own thread now.
baudrunner
- 17
- 1
Today I learned that a parsec is 3.262 light years long, and that the total number of possible 6 number combinations from the range of 1 to 39 inclusive are 3.262 million.
Hornbein
Gold Member
- 4,139
- 3,300
Today I learned that James Clerk Maxwell was the first to project a color image using the red-green-blue system.
I also learned that a few people can see a fourth color, so RGB is inadequate for them. One of these said the world of man was full of clashing colors, and that supermarkets were the worst.
I also learned that a few people can see a fourth color, so RGB is inadequate for them. One of these said the world of man was full of clashing colors, and that supermarkets were the worst.
Lisa!
Gold Member
- 672
- 96
TILT my problems with the boss might be side effects of the medication that I'm taking!
But that doesn't change the fact that she's really annoying and it's hard for everyone to stand her.
But that doesn't change the fact that she's really annoying and it's hard for everyone to stand her.

- 13,810
- 16,630
TIL how to make chicken jalfrezi in a slow cooker. A hint if you try it: don't be in the house smelling the lovely spicy cooking smell for six hours. I felt like one of Pavlov's dogs...
Silicon Waffle
- 160
- 202
TIL about drought tolerant plants (good GMO
) which help dry farmers to cope with water shortages.
) which help dry farmers to cope with water shortages.Similar threads
Will the Today I Learned Thread Be Reopened or Continued?
- Swamp Thing
- · Replies 1 ·
- Feedback and Announcements
- Replies
- 1
Chemical Forums down, or how I learned what slowloris is
- Borek
- · Replies 8 ·
- Computing and Technology
- Replies
- 8
High School An amazing fact which I learned today about pressure
- sahilmm15
- · Replies 4 ·
- Mechanics
- Replies
- 4
New realizations or "what I think I learned today"
- Planobilly
- · Replies 3 ·
- Electrical Engineering
- Replies
- 3
Other I learned that my degree won't arrive in the mail until July
- Eclair_de_XII
- · Replies 14 ·
- STEM Career Guidance
- Replies
- 14
I don't think I learned any mathematics as an undergrad
- TMO
- · Replies 25 ·
- STEM Academic Advising
- Replies
- 25
Confirming what I learned, a follow up differential equation
- stripedcat
- · Replies 2 ·
- Differential Equations
- Replies
- 2
I’ve made a huge mistake (or: how I learned I hate business and love physics)
- HugeMistake
- · Replies 1 ·
- STEM Academic Advising
- Replies
- 1
I learned calculus I and II using stewart's. I also taught myself
- physicsnoob93
- · Replies 3 ·
- Science and Math Textbooks
- Replies
- 3
Interesting Economics That I Learned-Big Government is Better
- gravenewworld
- · Replies 26 ·
- General Discussion
- Replies
- 26