Verify current calculations through inductor and capacitor in AC circuit

3 replies · 3K views · last reply
Michael_0039
Messages
59
Reaction score
7
Homework Statement
AC circuit: Find the current through the inductor & capacitor
Relevant Equations
nil
Hi!

I wonder if it is correct. Can someone confirm (maybe with a software) ?

Handwritten AC circuit solution using mesh current analysis: a 10 V source at 0 degrees and a 15 V source at -90 degrees, with resistors, an inductor j6 ohm, a capacitor -j5 ohm, and mesh currents I1, I2 and I3 labelled, followed by loop equations for loops 1 and 2.


Handwritten mesh-current derivation on lined paper: boxed equation (-10)I1 + (10+j)I2 + j5I3 = 0 labelled 2, loop 3 KVL with 5I3 + 15 angle -90 + (-j5)(I3 - I2) = 0, boxed equation (j5)I2 + (5-j5)I3 = -(15 angle -90) labelled 3, I1 = (10 + 10I2)/12, and final boxed equation (5/3 + j)I2 + (j5)I3 = 25/3.


Handwritten page 3 with Cramer's rule solutions: I2 = (CE-BF)/(AE-BD) = 3,21 ∠-14,68° (A); I3 = (AF-CD)/(AE-BD) = 0,5827 ∠-127,017° (A); I1 = (10+10I2)/12 = 1,094 ∠-3,55° (A).


I(L) = I2
I(C) = I2 - I3
--

Thanks.
 
Your work looks good. I worked the problem via nodal analysis and obtained the same results. Good job.
 
  • Like
Likes   Reactions: phinds and Michael_0039
Michael_0039, at the very end of your work, you didn't evaluate the expression for I1 correctly.

The correct value for I1 is 3.4955 ∠ -11.2195°

This doesn't affect your result for I(L) and I(C), but it is still a mistake.
 
The Electrician said:
Michael_0039, at the very end of your work, you didn't evaluate the expression for I1 correctly.

The correct value for I1 is 3.4955 ∠ -11.2195°

This doesn't affect your result for I(L) and I(C), but it is still a mistake.
You are right, I forgot (10+(10*I2))/12