What are the best software options for simulating semiconductor gas sensors?

AI Thread Summary
The discussion centers on software options for simulating semiconductor gas sensors, with a focus on the need for clarity regarding the specific type of gas sensor and simulation desired. Users mention Comsol Multiphysics as a potential tool but express difficulty in finding suitable tutorials for its application in this context. There is a request for recommendations for graphical software alternatives to Comsol and Quantum Espresso. The conversation emphasizes the importance of providing detailed information to receive accurate advice. Overall, participants seek effective simulation tools tailored to semiconductor gas sensor mechanisms.
Alba19
Messages
16
Reaction score
0
which soft wares are used in gas sensor simulation?
 
Engineering news on Phys.org
You must do a better job of explaining your question before we can answer.

What gas sensor?
What kind of simulation?
Why posted under Electrical Engineering?
Many tools are used to simulate anything, is that what you mean?
 
anorlunda said:
You must do a better job of explaining your question before we can answer.

What gas sensor?
What kind of simulation?
Why posted under Electrical Engineering?
Many tools are used to simulate anything, is that what you mean?
Semiconductor gas sensor simulation, coz it is related to electrical branch, I've used Comsol but i couldn't find any suitable tutorial.
 
Alba19 said:
Semiconductor gas sensor simulation, coz it is related to electrical branch, I've used Comsol but i couldn't find any suitable tutorial.
I'm looking for a graphical software to simulate a gas sensor mechanism. I thought "comsol multiphysics" could help me to determine the sensing mechanism of semiconductor gas sensor , but I didn't find any thing about this. I would appreciate you If you recommend an appropriate application except "quantum espresso" to help me
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top