What Is the Maximum Force Exerted by the Floor on the Ball?

Join the discussion
Registration is free. Start your own thread to ask a follow-up.
3 replies · 13K views
julz3216
Messages
18
Reaction score
0

Homework Statement



A 41 rubber ball is dropped from a height of 1.8 and rebounds to two-thirds of its initial height.
http://session.masteringphysics.com/problemAsset/1070447/4/09.P29.jpg
The figure (Part C figure) shows the impulse received from the floor. What maximum force does the floor exert on the ball?
t=5ms

Homework Equations



change in p = F*change in time
F=ma

The Attempt at a Solution



I tried and got Fmax = .176 by plugging into the 1st equation for impulse
 
Physics news on Phys.org
If you solved the other problem you posted you should know how to solve this so long as you calculated your Impulse correctly from the info given.
 
So I tried to do F*change in t = change in m*v but it didn't work. i calculated velocity by doing change in d/ change in t. i used 2.5 for t because that is where fmax occurs and i also used d as 1.8 because that is the distance the ball travels in 2.5 seconds

so i got v=.72 and then mv=.029
so 2.5F = .029
F = .0116

and that was wrong. so i don't really know what to do?
 
julz3216 said:
So I tried to do F*change in t = change in m*v but it didn't work. i calculated velocity by doing change in d/ change in t. i used 2.5 for t because that is where fmax occurs and i also used d as 1.8 because that is the distance the ball travels in 2.5 seconds

so i got v=.72 and then mv=.029
so 2.5F = .029
F = .0116

and that was wrong. so i don't really know what to do?

Where did you get v = .72 from? It fell 1.8m

V2 = 2*9.8*1.8m

How fast does it bounce back?

Isn't that going to give you the ΔV that you want to use?

The 2.5 ms* Fmax looks ok though.