Wiring a chain hoist for 480V three-phase operation

1 reply · 2K views · last reply
braren
Messages
5
Reaction score
0
Hi,

I have a chain hoist that I am trying to wire so that it'll run off of 480V.
The pictures below show the hoist/motor's technical specs, and what type of system it is.

Data plate of a Demag DCS-PRO 5-500 chain hoist listing 1100 lbs SWL, 3 ~ 380-480 V, 50/60 Hz, IP 55, motor ZNK 80 A 4, 0.97 hp, 2540 rpm, made in Germany.

Close-up of a blue electric motor housing with a grey metal cover plate, showing a black electrical connector with a white cable exiting its base, and a small rectangular terminal block beside it.


So now my question is this. How do I wire a plug for this system, so that I can run it? What plug type will I need? Does it matter which wire goes into L1, L2, and L3? Are there colors I need to or can't use? Other legalities?

I realize this is a lot of voltage and can be dangerous, so what do I need to know from a safety perspective I.E. what can/will happen if it gets wired incorrectly

Black cable gland plug housing beside a green pluggable terminal block labelled L3, L2 and L1 with a ground symbol, on a wooden surface.
 
Attachments
  • Data plate of a Demag DCS-PRO 5-500 1/1 H5 VS8-15 chain hoist, listing serial no. 94210151, SWL 1100 lbs, 3 ~ 380-480 V, 50/60 Hz, IP 55, motor ZNK 80 A 4, made in Germany.
    IMG_0130.JPG
    68.1 KB · Views: 565
  • Photo of the open junction box on a blue electric motor housing, showing a black plug connector, a black cable gland, a green four-terminal connector and a white wire routed beneath them.
    IMG_0132.JPG
    61.9 KB · Views: 544
  • Blue electric chain hoist motor unit on a wooden floor, with a yellow hook block and a red caution label reading NOT TO BE USED FOR LIFTING, LOWERING OR TRANSPORTING PEOPLE; a nameplate with specifications is on the housing.
    IMG_0131.JPG
    67.4 KB · Views: 498
You need to use a licensed electrician to wire that up for you. Thread is closed.
 
  • Like
Likes   Reactions: CalcNerd and jim hardy