Work done in elevator problem — is it positive or negative?

AI Thread Summary
The discussion centers on calculating the work done by gravity on an elevator and its passengers as they move between floors. The user calculated the forces involved and arrived at a total work of 2891 kJ but was confused about the sign of the answer. It was clarified that the problem specifically asks for the work done by gravity, which is negative when the elevator moves upward against gravitational force. Misinterpretation of the question's wording contributed to the confusion, highlighting the importance of precise language in physics problems. Understanding that gravity does negative work in this context is crucial for accurately solving such problems.
pandatime
Messages
21
Reaction score
15
Homework Statement
A lift of mass 800kg carries 20 people from a hotel lobby to their floors. Half the people get out on the 10th floor, the remainder on the 15th. What is total work done, in kJ, by gravity moving the lift and passengers? (You should assume each passenger has a mass of 70kg, the lobby is floor 0 and each floor is 10m in height)
Relevant Equations
W = Fd
w = mg
Hi! So, I've actually already solved this problem.. for the most part.

I have split up the work into two sections, floor 0 to 10, and floor 10 to 15.

From floor 0 to 10, I did
## F_{elevator} = w_{pass.} + w_{elev.} ##
## F = (70)(20 (num. of pass.))(9.8) + (800)(9.8) ##
## F_{elev.} = 21560N ##

From floor 10 to 15, I do the same calculations ( but change the number of passengers) and get ## 14700N ##

If I add both of these numbers, I get a total of 2891 kJ of work done, which is the correct answer ish.

What I'm getting wrong is the sign of the answer. I was under the impression that the work done would be positive since the elevator is moving up, and the force done by the elevator to move everybody and the lift up is also pointing upwards right? I'm struggling to grasp why the answer would be negative instead?
 
Physics news on Phys.org
You are asked for the work done by gravity, not by the elevator motor.

Things do not in general fall upwards.
 
The problem is asking "What is total work done, in kJ, by gravity moving the lift and passengers?" Although it is clear who is doing the work on whom, the phrasing "... by gravity moving the lift and passengers" can be easily misconstrued by the unwary to imply that gravity is responsible for the motion and therefore the displacement and the force are in the same direction. Perhaps it would have been clearer to ask, "What is the total work done by gravity on the elevator and its contents as they are moved from the lobby to the 15th floor?"

To @pandatime : If the question were asked as I suggest above, would it have made a difference to your answer? I am just curious.
 
  • Like
Likes jbriggs444 and pandatime
PeroK said:
You are asked for the work done by gravity, not by the elevator motor.

Things do not in general fall upwards.

kuruman said:
The problem is asking "What is total work done, in kJ, by gravity moving the lift and passengers?" Although it is clear who is doing the work on whom, the phrasing "... by gravity moving the lift and passengers" can be easily misconstrued by the unwary to imply that gravity is responsible for the motion and therefore the displacement and the force are in the same direction. Perhaps it would have been clearer to ask, "What is the total work done by gravity on the elevator and its contents as they are moved from the lobby to the 15th floor?"

To @pandatime : If the question were asked as I suggest above, would it have made a difference to your answer? I am just curious.
Thank you both of you! It's actually the first time I've done one of these problems, I usually deal with other scenarios and so I think I got tripped up by the fact that they asked for work done by gravity instead of just like an applied force that a person does in most of the other questions, I do think if it was worded your way @kuruman I might have been able to catch it by myself so!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top