Work Done on Motorbike: Calculating Force & Distance

  • Thread starter Thread starter victoration1
  • Start date Start date
  • Tags Tags
    Work
AI Thread Summary
To calculate the work done on the motorbike, the girl must overcome the gravitational force acting on the bike as it moves up the ramp. The ramp's length is 3.0 meters, with a height of 1.2 meters, resulting in a ramp angle of approximately 22 degrees. The gravitational force can be divided into perpendicular and parallel components, with the parallel force calculated to be 404N. The force exerted by the girl must equal the parallel force if the bike moves at a constant velocity, allowing for the calculation of work using the formula W=FD. Understanding the forces involved and creating a free body diagram will clarify the necessary calculations.
victoration1
Messages
7
Reaction score
0

Homework Statement


A girl uses a 3.0 m long ramp to push her 110 kg motorbike up to a trailer, the floor of which
is 1.2 m above the ground. How much work is done on the motorbike?


Homework Equations


W=FD where W is work, F is force and D is distance travelled.


The Attempt at a Solution


Assuming that 3.0m long ramp means a base length of 3.0 meters, then the hypotenuse of the ramp must be approximately 3.2meters. Thus, the bike must travel 3.2 meters in a diagonal direction. What I cannot find is the force which will push this bike up the ramp.
 
Physics news on Phys.org
Think of the free body diagram for this. Apart the force the girl exerts on the bike (and I'm assuming there's no friction, since it isn't included in the problem) what are the forces acting on the bicycle?
 
Gravity. Which on an inclined plane like this, can be divided into two components; perpendicular and parallel. Calculating the degree of the ramp I find 22 degrees by arctan1.2/3.0. Using cos22 x 1078 I find the perpendicular component of gravity,1000N, which is the same as the normal force exerted by the ramp on the bike. The parallel force is 404N when I use sin22 x 1078, and it is the amount of downward (relative to ramp) force acting on the bike if nothing supports it.
The problem is, given these components, I still cannot find work because the applied force of the girl isn't given.

Thanks for your reply.
 
Exactly. The weight of the bike, the normal force, and the force the girl exerts. These forces are equal, if the girl pushes the bike up with constant velocity.
Take a look at the attached free body diagram, write a couple of equations (with the x and y components), and the force the girl exerts should be pretty clear.
Let me know if you have any questions :)
 

Attachments

  • block on a ramp free body diagram2.jpg
    block on a ramp free body diagram2.jpg
    10.8 KB · Views: 461
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top