Power consumed by heaters connected in series

  • Thread starter Thread starter dmolson
  • Start date Start date
  • Tags Tags
    Power Series
AI Thread Summary
When two 1480 W heaters are connected in series to a 120V supply, the total power consumed is not simply the sum of their individual power ratings. Instead, the voltage is divided between the two heaters, leading to a lower overall power consumption. The correct approach involves understanding that the power consumed in a series circuit is determined by the total resistance and the voltage applied. The discussion emphasizes the importance of recognizing that in series configurations, the voltage drop across each heater affects the total power output. Thus, the power consumed by the two heaters in series will be less than the sum of their individual ratings.
dmolson
Messages
19
Reaction score
0

Homework Statement



Q20-9. The power rating of a 1480 W heater specifies the power consumed when the heater is connected to an ac voltage of 120V. What is the power consumed by two of these heaters connected in series, connected to the same voltage?

I am a little new to the electricity field of physics, any assistance would be greatly appreciated.
My first guess was that the power would be twice as much, but that is incorrect (2960 W)
 
Physics news on Phys.org
What equations do you know that relate voltage to power? Did you know that when in series the voltage is split between the components.
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Power Rating of 570 W Heaters in Series: 1140 W
Replies
2
Views
2K
Power of resistors in parallel vs series circuit
Replies
7
Views
3K
Electric Circuits: Why Power Rating of 2x 1000-W Heaters in Series is Not 2000-W
Replies
16
Views
6K
Solving a Series Circuit with Unequal Resistor Powers
Replies
12
Views
1K
Bulbs connected in series power consumed
Replies
28
Views
27K
Power rating of a heater in the same outlet as a hair dryer
Replies
4
Views
7K
What Is the Correct Source Voltage Amplitude for Desired Power in an AC Circuit?
Replies
19
Views
6K
Find power when resistor, capacitor, and inductor are connected in a series
Replies
1
Views
5K
Calculating Total Power of Heaters Connected in Series
Replies
6
Views
2K
Power loss in the transmission system with a transformer
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top