Firing into a industrial boiler

  • Thread starter Thread starter ricphysic
  • Start date Start date
  • Tags Tags
    Boiler Industrial
AI Thread Summary
The discussion centers on heat transfer efficiency in a water tube boiler furnace, specifically comparing the heat from the flame entering the boiler versus the combustion gases from an external combustion chamber. It is noted that the flame itself is merely the light emitted by the combustion gases, which suggests that the combustion gases may play a more significant role in heat transfer. Participants are encouraged to provide feedback or suggest alternative resources for further exploration of the topic. The inquiry seeks to clarify which method of heat transfer is more effective in this context. Overall, understanding these dynamics is crucial for optimizing boiler performance.
ricphysic
Messages
1
Reaction score
0
Which transfers more heat inside a water tube boiler furnace. The flame entering the boiler, or the combustion gases generated by the flame from a combustion chamber located outside the boiler?

Assume the flame is not impinging any water tube.

Would appreciate any and all feedback…with a brief explanation. Or perhaps you know of a better website where this question could be posted...or reference manual?

Thank you.
 
Physics news on Phys.org
The "flame" is just the light caused by the combustion gases.
 
Thread 'Gauss' law seems to imply instantaneous electric field propagation'

Thread 'Gauss' law seems to imply instantaneous electric field propagation'

Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
View full post »

Thread 'Simple thought experiment with Stefan-Boltzmann law: energy'

Dear all, in an encounter of an infamous claim by Gerlich and Tscheuschner that the Greenhouse effect is inconsistent with the 2nd law of thermodynamics I came to a simple thought experiment which I wanted to share with you to check my understanding and brush up my knowledge. The thought experiment I tried to calculate through is as follows. I have a sphere (1) with radius ##r##, acting like a black body at a temperature of exactly ##T_1 = 500 K##. With Stefan-Boltzmann you can calculate...
View full post »
Thread 'A scenario of non-uniform circular motion'

Thread 'A scenario of non-uniform circular motion'

(All the needed diagrams are posted below) My friend came up with the following scenario. Imagine a fixed point and a perfectly rigid rod of a certain length extending radially outwards from this fixed point(it is attached to the fixed point). To the free end of the fixed rod, an object is present and it is capable of changing it's speed(by thruster say or any convenient method. And ignore any resistance). It starts with a certain speed but say it's speed continuously increases as it goes...
View full post »

Similar threads

HVAC Exhaust flow for the chimney design on a custom boiler
Replies
8
Views
3K
Steam boiler efficiency calculations
Replies
10
Views
2K
On-demand steam engine idea
Replies
14
Views
2K
Producing Dry Saturated Steam in a Fire Tube Boiler
Replies
5
Views
4K
Calculating Steam Production in Fire Tube Boiler | 180ºC Dry Saturated Steam
Replies
15
Views
4K
Steam produced heat transfer heat exchangers
2
Replies
50
Views
12K
Solving Steam Entering Turbine Problem
Replies
15
Views
5K
What is the Formula for Calculating Heat Exchange in a Boiler Flue?
Replies
2
Views
2K
PEX Pipe in Residential Subfloor Thermal Mass
Replies
4
Views
2K
Heat transfer and combustion problem
Replies
7
Views
3K

Hot Threads

Recent Insights

Back
Top