Is it possible to build a mobile linear amp for a walkie talkie?

AI Thread Summary
Building a mobile linear amplifier for a walkie-talkie to enhance communication from a near-space balloon is feasible, but requires careful consideration of FCC regulations regarding GMRS radios. A linear amplifier can improve range, but optimizing the antenna design, such as using a quad helix for better gain, is crucial due to potential signal interference from balloon movement. It's essential to ensure that the balloon's transmitter can be turned off if it drifts into restricted areas, such as Canada or Mexico. Additionally, all transmissions must be easily understandable and comply with FCC rules to avoid legal issues. Overall, pursuing an amateur radio license may provide more flexibility and options for this project.
tackyattack
Messages
56
Reaction score
0
So, my goal is to be able to take two walkie talkies and put one of them on a near space balloon and have a microcontroller send data through the walkie talkie on the balloon down to the one on earth. I'm not sure it would reach all the way back to Earth so I thought of putting a small linear amplifier on the balloon walkie talkie to increase the range. But I have no idea how to build one that would work with a walkie talkie. Any ideas on how I could build one?

Here is the walkie talkies incase it helps: https://www.amazon.com/dp/B001UE6MIO/?tag=pfamazon01-20
 
Last edited by a moderator:
Engineering news on Phys.org
You might want to look into Amateur Radio. You can legally do this as this club has:

http://www.arhab.org/"
 
Last edited by a moderator:
Instead, I'd optimize the antenna situation. Having line-of-site communications is a great advantage, but you'll likely have all manner of tossing and rotation. Thus, I'd be tempted to attempt circular polarization.
On the ground, a quad helix would give you considerable gain without becoming a pencil beam. From what I've read, they're fairly simple to build and can feed the 50 ohms or so that you'll likely need. You might look under "wi fi quad helix" for ideas.
Oh yes, don't forget to insulate it. The top of the world can be a chilly place.

- Mike
 
Before you get too far along with your plans you should review the FCC Rules for GMRS radios. http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?c=ecfr&sid=604cc032b6ac0ad96ca79eab6219ca27&rgn=div5&view=text&node=47:5.0.1.1.5&idno=47#47:5.0.1.1.5.1

Here are some excerpts:
§ 95.3 License required.
Before any station transmits on any channel authorized in the GMRS from any point (a geographical location) within or over the territorial limits of any area where radio services are regulated by the FCC, the responsible party must obtain a license (a written authorization from the FCC for a GMRS system).

§ 95.101 What the license authorizes.
(a) A GMRS license authorizes a GMRS station to transmit messages to other GMRS stations at any geographical location within or over the territorial limits of any area where radio services are regulated by the FCC.
This means that if the balloon drifts over Canada or Mexico, or any other country, you must stop transmitting and that means having a means of turning off the balloon transmitter.

§ 95.183 Prohibited communications.
(a) A station operator must not communicate:
(4) Coded messages or messages with hidden meanings (“10 codes” are permissible);
This means that the meaning of your transmissions must be easily understandable to anyone listening on an ordinary receiver. The FCC wants to be sure your transmission is not being used for any illegal activity. You can't just send data.

dlgoff is correct, ham radio is your best bet and it's not that hard to get a license (even I have one).
 
Last edited by a moderator:
Oh and if you believe you can just do it without a license and without getting caught, this is interesting reading.

http://www.fcc.gov/Daily_Releases/Daily_Business/2011/db0404/DOC-305523A1.txt
 
Last edited by a moderator:
Have a read through this - My school achieved a ridiculous range, I'm pretty sure it details radio comms somewhere there: http://www.hexoc.com/pages/apex/apex-ii.php

Edit: Here is the technical document specifying data transmissions: http://balloon.hexoc.com/media/apextech.pdf
 
Last edited by a moderator:
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Back
Top