- #1
parker.clark
- 2
- 0
I am currently designing an aluminum-air battery(e.g. http://en.wikipedia.org/wiki/Aluminium_battery) for a lab class that I'm taking. It seems like the prototypical design for one of these batteries is to have an aluminum foil anode beneath a paper towel soaked in salt water as an electrolyte, and activated carbon on top of the paper towel that allows the oxygen cathode to interact with more surface area. I already plan on adding multiple layers to increase the output voltage and using some better electrolyte like NaOH to increase the power output, but beyond these basic changes I am undecided. Some other ideas I've had are to...
-replace the paper towel with some other barrier that is better at both conducting ions and impeding electron flow
-introduce some sort of solvent into the electrolyte in order to prevent buildup of aluminum hydroxide on the anodes, which reduces the cell's potential
-replace the activated carbon (or mix it with something) that provides a large surface area but also decreases ohmic losses and allows for greater electron transport above the electrolyte
The objective is to produce the greatest amount of electrical energy in 3 minutes(upon discharge), so lifetime concerns are not important. I'd appreciate any insight or advice that anyone might have!
Thanks!
-replace the paper towel with some other barrier that is better at both conducting ions and impeding electron flow
-introduce some sort of solvent into the electrolyte in order to prevent buildup of aluminum hydroxide on the anodes, which reduces the cell's potential
-replace the activated carbon (or mix it with something) that provides a large surface area but also decreases ohmic losses and allows for greater electron transport above the electrolyte
The objective is to produce the greatest amount of electrical energy in 3 minutes(upon discharge), so lifetime concerns are not important. I'd appreciate any insight or advice that anyone might have!
Thanks!