- #1
smokingwheels
- 70
- 0
Homework Statement
What is the indicated thermal efficiency of an engine?
Fuel used in total 42.61 cc/min @ 1730 rpm.
Fuel used to get to 1730 rpm = 29.16 cc/min no load.
Fuel left = 13.45 cc/min to do approx 4.335 kw at 1730 rpm approx 40.95 kph
Fuel heat content 34.8 kj/l
Approx 62kj / kw
According to the graph on http://web.mit.edu/16.unified/www/SPRING/thermodynamics/notes/node25.html"
The max ideal engine efficiency is about 62.81% efficient for a compression ratio of 10.5:1 when you look at the bit map with paint.
I worked it out on total fuel and got 36% but the engine uses approx 50% less fuel.
So I used the fuel used to create the power at 1730 rpm.
Homework Equations
Work over heat input.
The Attempt at a Solution
4.335 kw/min = 286 kj
13.45 cc/min = 0.01345 L * 34.8 kj = .46806 Mj = 468 kj
So 286kj / 468 kj = .611 * 100 = 61.1 % indicated thermal efficiency
My test maybe a few % low on consumption when compared to the ADR mileage test which I used the dyno figure for the mass of my car and a 30% efficient drive train.
Note: when I have finished checking and tidying up the raw data it will be in your favor slightly If I have not missed something or made a big error...LOL I wish I had lots of video camera's.
Thanks for all your help so far and in advance People from the Physics Forum.
Last edited by a moderator: