- #1
cash200107
- 2
- 0
I have just done an experiment on CR and LR circuits.
http://img9.picsplace.to/img9/21/RC.jpg
Connect channel 1 of the CRO across both the capacitor and resistor and channel 2 across the resistor.The trace on channel 1 is taken as the p.d. across the capacitor and that on channel 2 as ths current throught the capacitor.
http://img9.picsplace.to/img9/21/RL.jpg
Replace the capacitor waith a high inductance coil fitted on a double C-core.
I have some questions about this.
1.Why is channel 1 is connected across both the capacitor and resistor and not only the capacitor?
2.Why the trace on channel 2 gives the current through the capacitor?
3.When we increased the resistance value, the phase difference decreased.Why?
4.what is the phase difference between the p.d. and the current?
5.Change the resistance value and observe how this affects the phase
difference.Describle and explain the change,if any,in the phase difference.
6.Replace the capacitor with a high inductance coil fitted on a double c-core.Observe the CRO traces and note the phase diff between the p.d. across the inductor and the current through it.What is the phase diff. between the p.d. and the current?Why is it not 90°? How to sketch the CRO traces?
7.Change the resistance value and observe how this affects the phase difference.Describle and explain the change, if any, in the phase difference.
I have so many question to ask ..
http://img9.picsplace.to/img9/21/RC.jpg
Connect channel 1 of the CRO across both the capacitor and resistor and channel 2 across the resistor.The trace on channel 1 is taken as the p.d. across the capacitor and that on channel 2 as ths current throught the capacitor.
http://img9.picsplace.to/img9/21/RL.jpg
Replace the capacitor waith a high inductance coil fitted on a double C-core.
I have some questions about this.
1.Why is channel 1 is connected across both the capacitor and resistor and not only the capacitor?
2.Why the trace on channel 2 gives the current through the capacitor?
3.When we increased the resistance value, the phase difference decreased.Why?
4.what is the phase difference between the p.d. and the current?
5.Change the resistance value and observe how this affects the phase
difference.Describle and explain the change,if any,in the phase difference.
6.Replace the capacitor with a high inductance coil fitted on a double c-core.Observe the CRO traces and note the phase diff between the p.d. across the inductor and the current through it.What is the phase diff. between the p.d. and the current?Why is it not 90°? How to sketch the CRO traces?
7.Change the resistance value and observe how this affects the phase difference.Describle and explain the change, if any, in the phase difference.
I have so many question to ask ..
Last edited by a moderator: