Calculating Action from a Resonant LC Circuit

In summary, a resonant LC circuit with a capacitor of capacitance 100pf and an inductance of 0.1mH can produce a quantity with the dimensions of action, similar to Planck's constant "h". The value of this quantity can be obtained by calculating the energy stored in the capacitor, which is 0.5CV^2. By comparing this value with h, which is 6.626 x 10^-34 Js, it can be determined that the value obtained is larger than h, making Quantum Mechanics applicable in this case.
  • #1
shaiqbashir
106
0
Consider a resonant LC circuit. It consists of a capacitor of capacitance 100pf and an inductance of 0.1mH. suppose that when the circuit oscillates the max. voltage on the capacitor is 1mV. Energy stored in the capacitor is given as 0.5CV^2.

a) Show that in this circuit one can obtain a quantity having the dimensions of action (same as Planck;s constant "h").

b) Obtain the value of this quantity and compare with "h".
the value you obtain must be larger than "h". Quantum Mechanics is applicable if the quantity is comparable to "h".
 
Physics news on Phys.org
  • #2
Answer: a) The energy stored in the capacitor is 0.5CV^2. Here C and V are the capacitance and voltage respectively. The dimensions of this energy is ML^2T^-2, which is same as the dimensions of action (ML^2T^-2). This shows that one can obtain a quantity having the dimensions of action (same as Planck’s constant "h"). b) The value of this quantity can be obtained as follows: The maximum voltage on the capacitor is 1mV = 10^-3V. Using the energy equation 0.5CV^2, we obtain the energy stored in the capacitor as 0.5 x 100pF x (10^-3)^2 = 5 x 10^-7 J. Now, the action is the energy multiplied by time. Hence, the action can be obtained as 5 x 10^-7 J x T. Since Planck's constant has the dimensions ML^2T^-1, the action can be expressed as 5 x 10^-7 J x T = 5 x 10^-7 ML^2T^-1. Comparing this value with Planck's constant h = 6.626 x 10^-34 Js, we can see that the value obtained is larger than h. Hence, Quantum Mechanics is applicable in this case.
 
  • #3


a) In order to obtain a quantity with the dimensions of action, we can use the formula for the energy stored in a capacitor, which is 0.5CV^2. We know the values of C (100pf) and V (1mV), so we can plug those in and solve for the energy. This gives us 0.5(100pf)(1mV)^2 = 0.05pJ.

We can then use the formula for the energy of a harmonic oscillator, which is E = 0.5kx^2, where k is the spring constant and x is the displacement. In this case, the capacitor and inductor act as a harmonic oscillator, with the inductive reactance (XL) acting as the spring constant and the displacement (x) being the maximum voltage on the capacitor.

So, we can write the energy as E = 0.5(0.1mH)(1mV)^2 = 0.05pJ.

Since the dimensions of action are energy multiplied by time, we can rearrange this equation to get the quantity with the dimensions of action:

h = 2π√(LC) = 2π√(0.1mH)(100pf) = 0.0002pJ√(s).

b) Comparing this value to the Planck's constant (h = 6.626 x 10^-34 J√(s)), we can see that the value we obtained is larger than h. This means that the quantity we obtained is not comparable to h and therefore, quantum mechanics is not applicable in this case.

In order for quantum mechanics to be applicable, the quantity with the dimensions of action should be on the same order of magnitude as h. This means that the energy and time scales in the system should be in the same range as those in quantum mechanics. In this resonant LC circuit, the energy is too small and the time scale is too large for quantum mechanics to be applicable.
 

1. What is a resonant LC circuit?

A resonant LC circuit is an electrical circuit that consists of an inductor (L) and a capacitor (C) connected in parallel. This type of circuit can store electrical energy in the form of an oscillating current, and it exhibits a resonant frequency at which the circuit's impedance is at its minimum.

2. How do you calculate the resonant frequency of an LC circuit?

The resonant frequency (f) of an LC circuit can be calculated using the formula f = 1/(2π√(LC)), where L is the inductance in henries and C is the capacitance in farads.

3. Why is the resonant frequency important in an LC circuit?

The resonant frequency is important in an LC circuit because it determines the frequency at which the circuit will resonate and have the lowest impedance. This can be useful in applications such as filtering and tuning in radio circuits.

4. How do you calculate the total energy stored in an LC circuit?

The total energy (E) stored in an LC circuit can be calculated using the formula E = 1/2 * L * I^2, where L is the inductance in henries and I is the current in amperes.

5. What is the phase relationship between voltage and current in a resonant LC circuit?

In a resonant LC circuit, the voltage and current are in phase with each other. This means that they reach their maximum and minimum values at the same time and have the same frequency.

Similar threads

  • Introductory Physics Homework Help
Replies
5
Views
222
Replies
4
Views
422
  • Introductory Physics Homework Help
Replies
2
Views
2K
Replies
10
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
4K
  • Introductory Physics Homework Help
Replies
4
Views
1K
  • Introductory Physics Homework Help
Replies
8
Views
1K
  • Introductory Physics Homework Help
Replies
14
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Electrical Engineering
Replies
32
Views
4K
Back
Top