U233 immediate fission products ?

  • Thread starter Anuj06
  • Start date
  • Tags
    Fission
In summary, U233 and U235 produce similar fission products, but U233 releases fewer neutrons in its first fission reaction. The reproduction factor and number of neutrons produced per fission are higher for U233 compared to U235. Different reactor designs can be used to optimize the efficiency and minimize parasitic neutron absorption.
  • #1
Anuj06
2
0
Hi, what are the immediate fission products of U233 ? Is the first fission reaction of U233 same as U235 producing Ba and Kr but just different isotopes than U235 ? I would appreciate any help.

Thanks
 
Engineering news on Phys.org
  • #2
Anuj06 said:
Hi, what are the immediate fission products of U233 ? Is the first fission reaction of U233 same as U235 producing Ba and Kr but just different isotopes than U235 ? I would appreciate any help.

Thanks
The fission product elements are much the same, however, one starts with 2 fewer neutrons.

U-235 + n => U-236* => f.p. + 2 or 3 n

U-233 + n => U-234* => f.p. + 2 or 3 n

http://www.nature.com/nature/journal/v161/n4092/pdf/161520a0.pdf

https://www.physicsforums.com/showpost.php?p=2546513&postcount=9
 
Last edited by a moderator:
  • #3
Thank you ! But, then a small question, is U233 chain reaction self sustainable since it release fewer neutrons ?
 
  • #4
One would be interested in

η = reproduction factor = number of neutrons produced per neutron absorbed in fuel
> 2 implies breeding is possible

ν (nu) = number of neutrons produced per fission


Code:
Isotope  Thermal η   Fast η
  U-235      2.07        2.30
  Pu-239     2.11        2.70
  U-233      2.30        2.45
Ref: http://www.if.uidaho.edu/~gunner/ME443-543/LectureNotes/LMFBR.pdf

http://energyfromthorium.com/2006/07/29/wash-1097-appendix-a-reactor-physics/
It's probably better to obtain a copy of WASH-1097.

One can also construct a tighter (hex or triangular) lattice similar to that of a VVER-1000. Or one could use a CANDU (deuterium moderated) system, or a graphite moderated system using SiC/C clad fuel. Flouride salt is another possibility.

And one can minimize the parastic absorption of neutrons by exclusing Ni-based alloys from the reactor internals, to the extent possible.

This might be of interest.
http://www.osti.gov/bridge/servlets/purl/4505731-QrJfWh/4505731.pdf
 
Last edited by a moderator:
  • #5

What is U233 immediate fission products?

U233 immediate fission products refer to the elements created through the process of fission when U233, a fissile isotope of uranium, undergoes nuclear reactions. These elements are created immediately after fission and can include a wide range of isotopes.

How does U233 immediate fission occur?

U233 immediate fission occurs when U233 nuclei absorb a neutron and become unstable, causing them to split into two or more smaller nuclei and release energy. This process is known as nuclear fission and is the basis for nuclear power and weapons.

What are the most common immediate fission products of U233?

The most common immediate fission products of U233 include isotopes of elements such as xenon, strontium, cesium, iodine, and barium. These elements are produced in large quantities and can pose potential health and environmental hazards.

What are the uses of U233 immediate fission products?

The uses of U233 immediate fission products vary depending on the specific isotopes produced. Some isotopes may be used for medical purposes, such as in cancer treatment, while others may be used in industrial processes or as fuel for nuclear reactors.

How does the production of U233 immediate fission products impact the environment?

The production of U233 immediate fission products can have a significant impact on the environment, as these elements can be radioactive and have long half-lives. Proper management and disposal of these products are essential to minimize their potential effects on the environment and human health.

Similar threads

Replies
2
Views
2K
Replies
36
Views
5K
  • Nuclear Engineering
Replies
2
Views
1K
  • Nuclear Engineering
Replies
3
Views
1K
Replies
5
Views
2K
Replies
2
Views
1K
  • Nuclear Engineering
Replies
9
Views
2K
Replies
5
Views
2K
Replies
7
Views
3K
Replies
4
Views
3K
Back
Top