EE Study Resources: Best Books for Electrical Engineering

AI Thread Summary
The discussion focuses on finding effective study resources for electrical engineering, particularly for self-study in circuits, systems, and electromagnetic fields. Recommendations include MIT and UC Berkeley's open courseware for supplementary learning, alongside specific textbooks for foundational knowledge. Suggested books for electromagnetics include "Electromagnetics for Engineers" by Fawwaz T. Ulaby for beginners, and more advanced texts like "Introduction to Electrodynamics" by David Griffiths and "Field and Wave Electromagnetics" by David Cheng. Additionally, studying partial differential equations (PDE) is emphasized as crucial for a deeper understanding of electromagnetics, especially for those considering graduate studies. These resources aim to provide a solid foundation for future coursework in electrical engineering.
fernanhen
Messages
9
Reaction score
0
Hi everyone I just finished my first year of electrical engineering.

I am doing quite a few of self study for coming Calculus II and III, diff. equations, physics, and computer programming classes. I have all the resources I need for those.

However, I want to start studying the basics of electrical engineering now.

I want to focus my attention on circuits and systems, electronic circuits, microprocessors, electromagnetic fields, digital design, random signals and noise, and energy conversion.

I am interested in knowing what are the best books to study.

I know that MIT's and UC Berkeley's open course ware offers videos of lectures and other great resources.

But I also want regular books that can get me introduced on these topics. Rather something more simple and clear that I can study on my own.

I study at NJIT, New Jersey Institute of Technology, if anyone goes or went there by any chance..

I am not sure which field I want to specialize in but the topics I mentioned are part of the core curriculum for electrical engineers.

Thanks in advance.
 
Engineering news on Phys.org
For EM, a very good but simple book is:

https://www.amazon.com/Electromagnetics-Engineers-Fawwaz-T-Ulaby/dp/0131497243/ref=sr_1_3?s=books&ie=UTF8&qid=1342302814&sr=1-3&keywords=ulaby

It is used in San Jose State U. It is too simple for a real EM class, but it is a very good book for self study.

If you want more then

https://www.amazon.com/Introduction-Electrodynamics-3rd-David-Griffiths/dp/013805326X/ref=sr_1_1?s=books&ie=UTF8&qid=1342302929&sr=1-1&keywords=griffiths+electrodynamics

And

https://www.amazon.com/Field-Wave-Electromagnetics-David-Cheng/dp/0201128195/ref=sr_1_1?s=books&ie=UTF8&qid=1342302969&sr=1-1&keywords=field+and+wave+electromagnetics+cheng

Those are the books I studied and it will carry you all the way for undergrad and even good enough for the advanced EM class in U of Santa Clara for MS and PHD. This should at least give you a good foundation to enter the post grad program even for the best of all schools.

If you really want to get deep into EE, it is advisable to study PDE as Vector calculus and ODE is not quite enough for EM. This is particularly important if you plan to enroll in grad school.
 
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...

Similar threads

Back
Top