Basic integration identity- please jog my memory

AI Thread Summary
The discussion centers on verifying that the functions f_{n}(x) = A cos(2πn x/L) can serve as basis functions for the interval 0<x<L. The user has successfully normalized the function but is struggling with checking orthogonality. To demonstrate orthogonality, the integral condition ∫ f_{n}(x) f_{m}(x)dx = δ_{n,m} must be satisfied. A suggested approach involves using the trigonometric identity cosAcosB = 1/2 [cos(A+B) + cos(A-B)] to simplify the integration of the product of two cosines. This identity will help in resolving the integration challenge and confirming the orthogonality condition.
Oscur
Messages
30
Reaction score
0
Hello all, I'm doing a question for the maths module in my physics degree (I'm a second year undergrad) and there's a question I'm doing on basis functions.

Homework Statement



Verify that functions of the type f_{n}(x) = A cos \frac{2\pi n x}{L} where n = 0,1,2... can be used as a basis function for 0<x<L.

There are then three parts:

i. Normalise (I've done this part, I found a normalising factor of A=\sqrt{\frac{2}{L}}

ii. Check orthogonality (this is the part causing the trouble)

iii. Would it be possible to use f_{n}(x) as the basis for all functions in this interval? (this clearly follows from the other two parts, so once I've done ii, I should be able to answer this)

Homework Equations



To check orthogonality, I need to demonstrate that the condition:

\int f_{n}(x) f_{m}(x)dx=\delta_{n,m}, where the limits of the integral are the same as the interval of interest, is met.


The Attempt at a Solution



This means I need to integrate the product of two cosines with different arguments, and if I try and do this with integration by parts, I end up in an infinite loop with products of cyclic functions. Is there an identity for this?

Thanks in advance!

Matt
 
Physics news on Phys.org
Hello Matt! :smile:
Oscur said:
This means I need to integrate the product of two cosines with different arguments … Is there an identity for this?

It's one of the standard trigonometric identities …

cosAcosB = 1/2 [cos(A+B) + cos(A-B)] :wink:
 
Much appreciated, thank you!
 
Try using a trig identity to write cos(nx)cos(mx) in terms of cos((n-m)x) and cos((n+m)x).
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top