Defining Capacitance: Is Charge Stored per Unit Volt Accurate?

AI Thread Summary
Capacitance is accurately defined as the charge stored per unit voltage, aligning with the definition of a Farad as the charge required to create one volt. The term "potential difference" (pd) is synonymous with voltage, clarifying that both definitions refer to the same concept. The discussion highlights a common confusion between different terminologies but confirms that capacitance and the charge needed for a unit voltage are indeed equivalent. Understanding these definitions is crucial for grasping the principles of capacitors in electrical circuits. Clear definitions enhance comprehension of capacitance in practical applications.
LanguageNerd
Messages
14
Reaction score
0
Would it be wrong to describe Capacitance as being the charge stored per unit volt?

I have found on the internet that the definition of a Farad is the charge needed to cause one unit volt. Which means that the definition of Capacitance should surely be the same because the internet definition seems to be completely different to what I've previously learnt, no?

Thanks for any help in advance.
 
Physics news on Phys.org
In fact, my textbook actually describes the capacitance of a capacitor as being the charge stored per unit pd. Is this the same as the charge needed to cause one unit pd in the circuit?
 
LanguageNerd said:
In fact, my textbook actually describes the capacitance of a capacitor as being the charge stored per unit pd. Is this the same as the charge needed to cause one unit pd in the circuit?
It isthe same, but what is a pd?
 
My apologies, I meant volt
 
Thank you by the way!
 
pd = potential difference, which is what the volt unit measures.
 
I was using the Smith chart to determine the input impedance of a transmission line that has a reflection from the load. One can do this if one knows the characteristic impedance Zo, the degree of mismatch of the load ZL and the length of the transmission line in wavelengths. However, my question is: Consider the input impedance of a wave which appears back at the source after reflection from the load and has traveled for some fraction of a wavelength. The impedance of this wave as it...
Back
Top