Aperture antenna directivity calculation

3 replies · 3K views · last reply
baby_1
Messages
159
Reaction score
16
Hello
Here is an uniform E filed distribution aperture antenna E and H far filed euations
Set of far-field equations for a uniform aperture antenna: E_r = 0, E_theta and E_phi given in terms of sin and cos factors of X and Y, H_r = 0, and H_theta and H_phi given as negative and positive E_phi and E_theta divided by eta.


and here is directivity calculation approach
Equations (12-34) to (12-37) from a textbook on aperture antennas: magnetic field H_a = -a_x E0/eta, radiated power integral giving |E0|^2/(2 eta) times aperture area ab, maximum radiation intensity U_max, and directivity D0 = 4 pi U_max / P_rad = 4 pi ab / lambda^2 = 4 pi A_p / lambda^2 = 4 pi A_em / lambda^2.

my problem is why don't we calculate D with both E(theta) and E(phi)? My mean is:
instead of using
Equation U = r^2 . P_ave = r^2 (|E(theta)|^2 / (2 eta)), relating radiation intensity U to average power density P_ave at distance r, with E(theta) and impedance eta.

we should use
Equation for average radiated power density: U = r^2 P_ave = r^2 (|E(theta)|^2 + |E(phi)|^2) / (2 eta), with r squared multiplying the power and eta in the denominator.

because both of them are not zero in far-filed zone and not zero at theta=pi/2
 
[itex]E_0[/itex] is the magnitude of the electric field vector E. If you were to compute the sum of the magnitude squared of the components as you suggest, it should come out as [itex]E_0^2[/itex] as written in the text.

BTW, you have written something different. I assume that you mean [itex]E_\theta^2 + E_\phi^2[/itex] rather than [itex]E^2(\theta)+E^2(\phi)[/itex]? The latter is valid but means something else.
 
Dear marcusl
you are right I wanted to write
Equation: U = r^2 (|E_theta|^2 + |E_phi|^2) / (2 eta), giving radiation intensity U in terms of r, the E-field components E_theta and E_phi, and impedance eta.

As the writer wrote we have
Equation for radiation intensity U = r^2(|E_theta|^2 / 2eta) = r^2(a^2 b^2 K^2 E_0^2 Sin(phi)^2 / 4pi^2 r^2 * 2eta) = (ab/lambda)^2 * E_0^2 Sin(phi)^2 / 2eta.

and we assume phi=pi/2 that maximizes U.
and with my approach:
Typeset equation for radiation intensity U = r^2(|E_theta|^2 + E_phi|^2)/(2 eta), expanded with E_0 terms, a and b, sin(phi) and cos(phi), ending with (ab/lambda)^2 * E_0^2/(2 eta).

and I didn't know why we assume only
gif.gif
to calculate power intensity ( U) ( as in the book mentioned)?
 
Last edited:
The book didn't say to use [itex]E_\theta[/itex], it said that the field is maximum at [itex]\theta=0[/itex]. Putting that angle into the equations and finding the sum of the squares of the components, as you did, gives the answer.
 
  • Like
Likes   Reactions: baby_1