Changes in velocity with Direction change

AI Thread Summary
Tim's change in velocity is calculated using the formula Δv = v2 - v1, where v1 is 6.4 m/s south and v2 is 5.8 m/s west. The components of the velocities can be represented as v1 = (0, 6.4) and v2 = (5.8, 0), leading to Δv = (5.8, -6.4). While the change in velocity can be expressed as a vector, the magnitude, which is the hypotenuse of the resulting triangle, may also be of interest. Clarification on whether to include angle or direction in the answer depends on the specific requirements of the question. Proper representation of axes is crucial for unambiguous communication of the velocity components.
skatergirl
Messages
9
Reaction score
0

Homework Statement



Tim is running cross country at 6.4m/s when he completes a wide angle turn and continues at 5.8m/s[w]. What is his change in velocity?


Homework Equations



Δv=v2-v1
a2+b2=c2

The Attempt at a Solution



i am not sure how i am supposed to find the change in velocity...
i could just find the hypotenuse but i think that is giving me the resulting acceleration and not the actual change. but I am quite sure its not as simple as just subtracting the two values either ??
 
Physics news on Phys.org
You have to remember that velocity is a vector: so we have v_1 = (0,6.4) and v_2 = (5.8,0) (where (1,0) points West and (0,1) points South), so as you correctly wrote: \Delta v = v_2 - v_1 = (5.8, -6.4). This is technically the change in his velocity, but the question may be just asking for its magnitude (which, as you note, is the hypotenuse).
 
Last edited:
ok i will include both in my answer then. thank you. also should i be including the angle/direction? do you draw the s or w arrow first when drawing the diagram? like will the angle be between the hyp and 5.8 or the hyp and 6.4?
 
skatergirl said:
also should i be including the angle/direction?

If you include the information about what your axes are (i.e. South = (0,1), West = (1,0) ) then when you write the components of \Delta v down you have represented it unambiguously. You shouldn't need to include it unless the question specifically asks you for it.

do you draw the s or w arrow first when drawing the diagram? like will the angle be between the hyp and 5.8 or the hyp and 6.4?

I'm not sure I understand the first question. In answer to the second, you would have to be specific (e.g. "the vector is 10° to the East of North", or "at a bearing of 010°" or some similar specification of angle - and note that was just an example, not the direction of \Delta v)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top