Conservation of energy - find speed of block

Click For Summary

Homework Help Overview

The problem involves a 2.4kg block dropped from a height of 5m onto a spring, with the spring compressing 25cm when the block is momentarily at rest. The objective is to find the speed of the block when the spring is compressed by 15cm, incorporating concepts of energy conservation.

Discussion Character

  • Exploratory, Assumption checking, Conceptual clarification

Approaches and Questions Raised

  • Participants discuss the conversion of potential energy to kinetic energy and the role of the spring's potential energy in the calculations. Some express uncertainty about how to incorporate the spring constant, while others suggest that it may not be necessary for the calculations.

Discussion Status

The discussion is ongoing, with participants exploring different interpretations of energy conservation principles. Some have provided alternative formulations and calculations, while others express doubts about the correctness of their approaches and the provided answer key.

Contextual Notes

There is a noted lack of information regarding the spring constant, which is central to the energy calculations involving the spring's potential energy. Participants are also questioning the assumptions made in their calculations and the validity of the answer key.

man_in_motion
Messages
11
Reaction score
0

Homework Statement


A 2.4kg block is dropped onto a spring from hieght of 5m. When the block is momentarily at rest, the spring is compressed 25cm. Find the speed of the block when the compression of the spring is 15cm.
answer: 10m/s


Homework Equations


[tex]K=\frac{1}{2}mv^2[/tex]
[tex]U_g=mgh[/tex]
[tex] \Delta U = \Delta K[/tex]


The Attempt at a Solution


[tex]U_o=mgh=2.4kg(9.81m/s^2)(5m)=117.72J[/tex]
since all the potential energy gets converted into kinetic energy
[tex]117.72J=\frac{1}{2}mv^2[/tex] then I solve for v and plug the numbers in. I get the right answer but I know I'm doing it wrong because I'm not sure how to take the spring into acount, especially when the springs constant isn't given.
 
Physics news on Phys.org
Hi man_in_motion! :smile:
man_in_motion said:
A 2.4kg block is dropped onto a spring from hieght of 5m. When the block is momentarily at rest, the spring is compressed 25cm. Find the speed of the block when the compression of the spring is 15cm.
answer: 10m/s

[tex]U_o=mgh=2.4kg(9.81m/s^2)(5m)=117.72J[/tex]
since all the potential energy gets converted into kinetic energy
[tex]117.72J=\frac{1}{2}mv^2[/tex] then I solve for v and plug the numbers in. I get the right answer but I know I'm doing it wrong because I'm not sure how to take the spring into acount, especially when the springs constant isn't given.

No, you probably are doing it right.

You don't need to use k, because mgh = 1/2 k 252, and the other PE is 1/2 k 152, so the ks cancel. :wink:
 
thanks tiny-tim, though I'm still not entirley convinced.
consider:
[tex]K_f-K_o = K_f = U_f-U_o=U_f_g+U_f_s-U_g_o=(mg(0.25m)+\frac{1}{2} \cdot \frac{mg}{0.25m}0.15^2m)-mg(5m)=\frac{1}{2}mv^2[/tex]

Then I solve for v and I get
[tex] v=\sqrt{\frac{2(mg(0.25)+\frac{1}{2} \cdot \frac{mg}{0.25} \cdot 0.15 - mg(5))}{m}}[/tex]
granted now I no longer get 10m/s, but the answer key could be wrong. what do you think?
 
Hi man_in_motion! :smile:

(just got up :zzz: …)

Sorry, I don't understand your first line. :confused:
 
Energy is conserved
[tex] K_f+U_f=K_o+U_o[/tex]
[tex] K_0[/tex] goes to 0 and rewriting the equation we get [tex]K_f=U_o-U_f=\Delta U[/tex]
Initially there is only potential energy due to gravity, when the block is in the air
[tex]U_o_g=mgy=2.4kg(9.81m/s^2)5m[/tex]
There are 2 final potential energies: one for the gravity and one for the spring
[tex] U_f_g=mgy=2.4kg(9.81m/s^2)(-0.15m)[/tex]
[tex] U_f_s=\frac{1}{2}kx^2=\frac{1}{2}k(0.15m)^2[/tex]
We don't know k (spring constant) so we need to figure it out using Newton's 2nd law when the block is momentarily at rest

[tex] \Sigma F_y=ma_y=0=mg-k(0.25)=(2.4kg)(9.81m/s^2)-k(0.25m)=0[/tex]
solving for k I get
[tex] k=\frac{(2.4kg)(9.81m/s^2)}{(0.25m)}[/tex]

Now we know
[tex] U_f_s=\frac{1}{2}\frac{mg}{0.25} \cdot (0.15m)^2[/tex]

Plugging things into the first equation

[tex] K_f=U_f-U_o=mg(0.25m)+\frac{1}{2}\frac{mg}{0.25} \cdot (0.15m)^2-mg(5m) = \frac{1}{2}mv^2[/tex]

sovling for v from the right side of the equation gives
[tex] v=\sqrt{\frac{2(mg(0.25)+\frac{1}{2}(0.15m)^2-mg(5m))}{m}[/tex]
but this gives me the wrong answer

If I have m following a constant (namley 0.25, 0.15 or 5) it stands for meters (the unit) other wise it's for mass of the block.
 
Last edited:

Similar threads

  • · Replies 5 ·
Replies
5
Views
1K
  • · Replies 12 ·
Replies
12
Views
3K
Replies
29
Views
3K
Replies
24
Views
4K
Replies
3
Views
2K
  • · Replies 9 ·
Replies
9
Views
2K
  • · Replies 3 ·
Replies
3
Views
2K
Replies
7
Views
3K
Replies
30
Views
2K
  • · Replies 3 ·
Replies
3
Views
2K