Controlling a Robot with GPS: What You Need to Know

[amaresh92]

hi,
for my project i want to control my robot using GPS system.could i get name of the things what is required to execute this.i have already built a robo now i need to embeded this with GPS .
or, please tell me how to implement GPS.

thanks in advance.

 

[mfb]

There are commercial GPS receivers, I would use one of those instead of constructing everything on your own. Just check which data connections they offer to read the position.

 

[berkeman]

And keep in mind that GPS position data is only accurate to within 50 meters or so. You will not be using it for fine position data for your robot...

Here is a module from Trimble: http://www.trimble.com/timing/resolution-smt.aspx

 

[mfb]

And keep in mind that GPS position data is only accurate to within 50 meters or so. You will not be using it for fine position data for your robot...

Relative positions should be more precise, and differential GPS (+$) can reach precisions of some centimeters.

 

[alphysicist]

Hello there,

Controlling a robot with GPS is a fascinating project! To successfully execute this, you will need the following:

1. A GPS module: This is the key component that will provide the location data to your robot. You can choose from a variety of GPS modules available in the market, such as the NEO-6M or the Adafruit Ultimate GPS module.

2. A microcontroller: This is the brain of your robot and will process the GPS data received from the module. Popular options include Arduino, Raspberry Pi, or BeagleBone.

3. A motor controller: This is necessary if your robot has motors that need to be controlled for movement. You can choose from various motor controllers available, depending on the type of motors used in your robot.

4. A power source: Your robot will need a power source to function, so make sure to choose one that can provide enough power for all the components.

To implement GPS in your robot, you will need to connect the GPS module to your microcontroller and write code to receive and process the location data. You can find tutorials and resources online to help you with this.

I hope this helps you get started on your project. Good luck!